Electromagnetic time reversal for online partial discharge location in power cables: Influence of interfering reflections from grid components
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The progress of high power electromagnetic (HPEM) sources during the late 1990s raised the concern in the electromagnetic compatibility (EMC) community that they could be deployed for criminal purposes to interfere with the operation of modern electronic s ...
Inductive power transfer technology is an attractive solution for medium voltage applications by eliminating the need for high voltage cables or wired connections in general. This paper introduces an inductive power transfer system which has multiple indep ...
This paper reports the results of two experimental campaigns aimed at studying the high-frequency response of a raceway containing low voltage power, telephone, and Ethernet cables, to external electromagnetic field illumination. The raceway was tested aga ...
Institute of Electrical and Electronics Engineers2016
The localization of partial discharges (PD) is important to monitor the conditioning of high voltage insulator materials. One of the key components in power grids is the high power transformer. Localization of PDs in these pieces of equipment can increase ...
Elsevier2022
, , , ,
Coated conductors could be promising materials for the fabrication of the large magnet systems of future fusion devices. Two prototype conductors (flat cables in steel conduits), each about 2 m long, were manufactured using coated conductor tapes (4 mm wid ...
2015
In the framework of high luminosity upgrade of Large Hadron Collider at CERN, superconducting links are being developed. MgB2 wire is a candidate conductor for use in high- current cables. Mechanical properties of this material are of key importance for th ...
2015
, ,
In view of the development of cables for next-generation fusion reactors, research activities are carried out on all HTS materials available from industrial production. Preliminary design of a react and wind cable using Bi-2212 wires is carried out, inspir ...
2015
, ,
In many cable structures, special types of joints are designed to allow cables to slide freely along the joints. Thus, a number of discrete cable elements are substituted by a single continuous cable that slides over multiple nodes. Continuous cables are e ...
Elsevier2017
, ,
The main electrical and mechanical requirements for the LTS fusion conductors of DEMO are retained as a starting point for the development of HTS fusion cables. Based on the HTS coated conductor technology, a flat cable design was proposed by CRPP Swiss Pl ...
In this chapter, we discussed the TL theory and its application to the problem of lightning electromagnetic field coupling to transmission lines. After a short discussion on the underlying assumptions of the TL theory, we described seemingly different but ...
