Evaluation of Interface and Residual Strain of NiTi Layer Deposited on NiTiX Substrate by Laser Powder Bed Fusion
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The polarity of translation boundaries (TBs) in antiferroelectric PbZrO3 is investigated. We show that previous experimentally reported polar property of RIII-1 type TB can be well approximated by a strain-free rigid model. Based on this, the modeling inve ...
Recent advances in large-scale synthesis of graphene and other 2D materials have underscored the importance of local defects such as dislocations and grain boundaries (GBs), and especially their tendency to alter the electronic properties of the material. ...
Three-point bending tests were performed on double-anchored, < 110 > silicon nanowire samples in the vacuum chamber of a scanning electron microscope ( SEM) via a micromanipulator equipped with a piezoresistive force sensor. Nanowires with widths of 35nm a ...
Correlating in vivo imaging of neurons and their synaptic connections with electron microscopy combines dynamic and ultrastructural information. Here we describe a semi-automated technique whereby volumes of brain tissue containing axons and dendrites, pre ...
In this work, the effects of vanadium addition in the range of 0.3-3% (in weight percent) for an oxide dispersion strengthened reduced activation ferritic (ODS RAF) steel were investigated. Samples of the V-modified steel have been prepared using elemental ...
In the quest of the structural materials for the future fusion reactor, it has been shown that ferritic/martensitic (F/M) steels are very promising candidates, with a good radiation resistance in terms of damage accumulation in the microstructure relative ...
The aim of the thesis is to obtain more understanding about the influence of plastic deformation on the microstructural changes observed in single crystal (SX) Ni-based superalloys using diffraction techniques. This work was organised around two main probl ...
The ability to reshape nanopores and observe their shrinkage under an electron microscope is a powerful and novel technique14,17. It increases the sensitivity of the resistive pulse sensing and enables to detect very short and small molecules12,31. However ...
In this study, we explored the growth kinetics of the Al-Fe intermetallic (IM) layer at the joint interface of the St-12/Al-5083 friction stir lap welds during post-weld annealing treatment at 350, 400 and 450 degrees C for 30 to 180 mm. Optical microscope ...
Silica nanowires spanning 10 μm-deep trenches are fabricated from different types of silsesquioxane-based precursors by direct e-beam patterning on silicon followed by release through deep reactive ion etching. Nanowire aspect ratios as large as 150 are ac ...
