Estimation of the bar stress based on crack width measurements in reinforced concrete structures
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
For various types of civil structures such as bridges, skyscrapers and other slender towers, oil rigs as well as runaways, dynamic loading is predominant. This holds true especially for bridges where loads have increased considerably in the last hundred ye ...
In typical reinforced concrete design, reinforcement is designed to carry axial forces, but it can also resist transversal forces by dowel action. This is usually neglected for simplicity's sake in the design phase, but it can be accounted for either expli ...
Existing shear-cracked structures need to be reliably verified in order to avoid redundant interventions. Code provisions often raise shear safety and/or fatigue life concerns of the reinforcement subjected to stress concentrations due to cyclic dowel acti ...
In concrete structures, opened cracks contribute significantly to the transfer of shear and normal stresses through the contact forces occurring between fractured surfaces. Such contact forces are due to protruding asperities, engaged by interlocking and f ...
EPFL2021
The observation of cracks in normally functioning reinforced concrete (RC) structures is expected as the tensile strength of concrete is relatively low. However, one or more of those cracks can start to propagate with increasing crack openings, localizing ...
2023
Aggregate interlocking is a phenomenon occurring when the opposite sides of a concrete crack slide relative to each other. Due to surface roughness, protruding material from one crack-side can engage with the opposite one and thus exchange forces. This aff ...
In this paper, we present a novel finite element model to simulate alkali-silica reaction in a realistic concrete meso-structure. Application of the internal ASR loading leads to the evolution of multiple deviated cracks and corresponding macroscopic expan ...
The significance of sustained loading on the compressive and tensile strength of concrete has been experimentally verified since the 1950s and is currently acknowledged in most design codes implicitly or explicitly. However; its influence on other potentia ...
Simplified assumptions have traditionally been made on the rebar–to–concrete interaction in structural concrete to calculate the stress state in rebars. Such assumptions typically consider a uniform stress state in the reinforcement at a given cross sectio ...
Codes of practice can be overly conservative, particularly for the shear resistance of reinforced concrete beams with shear reinforcement when large loads act close to supports. This thesis addresses the topic by proposing a refined design approach based o ...