Adhesively bonded lap joints of pultruded GFRP shapes
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
This paper presents results from studies on the fatigue behavior of pultruded GFRP laminates, adhesively bonded double lap joints composed of laminates, and full-scale adhesively bonded FRP bridge deck and steel girder connections. The studies show that th ...
The present work deals with the determination of mechanical properties of materials using instrumented indentation techniques. The main advantage of indentation testing is that it is relatively simple to perform and does not need any special and time-consu ...
Since decades traditional friction welding methods are applied industrially to metal and thermoplastic synthetics. Research showed that for different applications this method is promising for wood too. The process does not necessitate any additional materi ...
A probabilistic method for the strength prediction of adhesively bonded double lap joints composed of pultruded GFRP adherends subjected to quasi-static axial tensile loading is presented. The prediction method is based on the experimentally determined mat ...
Analytical prediction methods for axial stresses and deflections at the serviceability limit state and for ultimate failure loads are proposed for hybrid bridge girders consisting of FRP bridge decks adhesively bonded to steel girders. The methods allow fo ...
This paper compares different models currently used to calculate the shear strength of unreinforced masonry (URM) walls retrofitted using fiber reinforced polymers (URM-FRP). The shear strengths of six recently tested URM-FRP walls were compared to shear s ...
The objective of this study was to investigate the behavior of highly functional acrylates, during isothermal ultraviolet (UV) curing. The materials included a pentafunctional acrylate and two acrylated hyperbranched polymers, one with a stiff polyester co ...
Floating production, storage and offloading systems (FPSOs) have been widely used for the development of offshore oil and gas fields because of their attractive features. They are mostly ship-shaped, either converted from existing tankers or purposely buil ...
The effect of different curing temperatures (from 20 to 40 °C) on the compressive strength and hydration of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC) have been investigated between 3 and 28 days, using the loss on ignition test (LOI) and th ...
Nanostencil lithography is considered a promising emerging nanopatterning method due to its simple process flow, low cost, little restriction on materials, and high compatibility with organic or biological surfaces. The principle of shadow mask deposition ...
