Tragverhalten und Bemessung von Holz-Glas-Verbundträgern unter Berücksichtigung der Eigenspannungen im Glas
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A critical aspect in the design of tubular bridges is the fatigue performance of the structural joints. Economic viability depends on it. Lower fatigue strength for joints with thicker failing members was observed in welded joints typical to the bridge app ...
The semicontinuous direct chill (DC) casting of large cross-section rolling sheet ingots of high strength aluminium alloys (2xxx and 7xxx series) gives birth to high residual (internal) stresses generated by a non-uniform cooling. These stresses must be re ...
The behavior of seven one-half scale masonry specimens before and after retrofitting using fiber-reinforced polymer (FRP) is investigated. Four walls were built using one-half scale hollow clay masonry units and weak mortar to simulate walls built in centr ...
Since decades traditional friction welding methods are applied industrially to metal and thermoplastic synthetics. Research showed that for different applications this method is promising for wood too. The process does not necessitate any additional materi ...
To improve the reduced available experimental data on the load capacity of full scale bridge deck slabs, 3 tests on a large scale bridge cantilever (10 x 4.2 m) were done. The cantilevers were tested under 4, 2 and 1 concentrated loads simulating traffic w ...
This paper compares different models currently used to calculate the shear strength of unreinforced masonry (URM) walls retrofitted using fiber reinforced polymers (URM-FRP). The shear strengths of six recently tested URM-FRP walls were compared to shear s ...
Reinforced concrete bridge deck slabs without shear reinforcement can be subjected to concentrated or distributed loads of important magnitude. Under these loads their structural response is not always ductile. In particular under concentrated loads their ...
Polymethylmethacrylate (PMMA) is used in many applications requiring good optical properties, resistance to ageing and resistance to UV irradiation, in spite of its relatively poor mechanical response to impact loading. In order to extend the range of appl ...
For centuries, the use of glass in buildings was essentially restricted to functions such as windows and glazing. Over the last decades, continuous improvements in production and refining technologies have enabled glass elements to carry more substantial s ...
In the summer of 2005, after eight years of use as a temporary bridge during the winter, the Pontresina Bridge for pedestrians was transported to the Swiss Federal Institute of Technology Lausanne for a detailed assessment of the structural safety, service ...
