Coalescence and mechanical behaviour of semi-solid aluminium alloys in relation to hot tearing
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tear formation has been observed during the solidification of a succinonitrile–acetone (SCN-acetone) alloy by pulling the columnar dendrites in the transverse direction with a stick. It is observed that the cracking of the mushy zone (hot tears) always ...
The motivation of this work derives from the need of the cutting tool industry to improve its products in order to support harder and harder working conditions, namely increasing cutting speeds and working on stronger modern materials. The lifetime of the ...
Modeling of the constitutive behavior was undertaken for Fe- Cr-C tempered martensitic alloys. Tensile tests were carried out at room temperature and constant nominal strain rate. In order to obtain a fully martensitic structure with different prior austen ...
In many casting processes, some stages, such as the starting phase in the direct chill casting of aluminium alloys, are particularly critical because of the propensity of some alloys to develop either hot tears which initiate at non zero liquid fraction, o ...
As for most of the topics in the field of solidification, Mert Flemings has always pioneered new ideas. While much of the understanding of hot tearing formation was already known about 30 years ago, he devised with Metz an interesting apparatus for studyin ...
The aims of the preliminary study reported in this document were twofold. Firstly, within the context of the application of UHPFRC for the rehabilitation of reinforced concrete structures, to identify the phenomena that require further study with respect t ...
Molecular statics simulations of crack growth in fully lamellar Ti-Al are performed to elucidate the role of lamellar structure in determining deformation and fracture toughness in nanoscale structures. The lamellar boundaries are highly effective in inhib ...
As for most of the topics in the field of solidification, Mert Flemings has always pioneered new ideas. While much of the understanding of hot tearing formation was already known about 30 years ago, he devised with Metz an interesting apparatus for studyin ...
The tolerances of semi-continuously cast products of aluminium alloys are very critical if the scalping of the ingot faces is to be minimised before rolling. In the steady state regime of casting, the dimensions of the section of the solidified ingot are l ...
In order to eliminate internal and surface defects, which appear in the ingots during continuous casting of metallic alloys, homogeneous and fine structures are often required. Therefore, when the adjunction of inoculant substances is not possible, the ele ...
