Consolidation and deconsolidation in composite processing
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Gecko-inspired microfibre arrays with 42 million polypropylene fibres cm−2 (each fibre with elastic modulus 1 GPa, length 20 μm and diameter 0.6 μm) were fabricated and tested under pure shear loading conditions, after removing a preload of less than 0.1 N ...
Joint analysis using a non-linear finite element model has been performed to analyze the effects of adhesive ductility on the stiffness and strength of full-scale adhesively-bonded double-lap joints composed of brittle pultruded GFRP laminates. Experimenta ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Search StringAdvanced >
Saved Searches >ARTICLE TOOLSGet PDF (641K)
Save to My Profile
E-mail Link to this Article
Export Citation for this Article
Get Citation Alerts
Request PermissionsMore Sharing ServicesShare
|
Share on citeuli ...
The present work is aimed at assessing the feasibility of integrating thermoplastic polypropylene nanocomposite matrices into conventional fiber-reinforced composites based on hybrid textiles that incorporate both the matrix and glass-fiber yarns, in order ...
The onset voltage of a colloid thruster is an important parameter in the design of micromachined thrusters. Because dimensions in MEMS thrusters are in the range of several tens of micrometers and because extractor electrodes can be only 5 μm from the capi ...
Particle reinforced metal matrix composites are manufactured by high-pressure infiltration. These composites contain roughly 50% by volume of discrete alumina inclusions dispersed homogeneously in a continuous aluminium-based matrix. Three matrices, namely ...
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Nowadays the joining of dissimilar materials is often the only solution to fulfill the complex requirements of high technology applications. One of the fields in which the research activity is more intense and promising is that of the brazing of ceramics w ...
