Consolidation and deconsolidation in composite processing
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
From airplanes to sailboats to bridges, composite materials have become a significant part of our everyday structures. With increasing demand, these materials are pushed to their limits to improve structural efficiency. As a consequence, research and devel ...
Joint analysis using a non-linear finite element model has been performed to analyze the effects of adhesive ductility on the stiffness and strength of full-scale adhesively-bonded double-lap joints composed of brittle pultruded GFRP laminates. Experimenta ...
Gecko-inspired microfibre arrays with 42 million polypropylene fibres cm−2 (each fibre with elastic modulus 1 GPa, length 20 μm and diameter 0.6 μm) were fabricated and tested under pure shear loading conditions, after removing a preload of less than 0.1 N ...
The onset voltage of a colloid thruster is an important parameter in the design of micromachined thrusters. Because dimensions in MEMS thrusters are in the range of several tens of micrometers and because extractor electrodes can be only 5 μm from the capi ...
The aim of this thesis is to assess the feasibility of integrating nanoparticles into glass fiber (GF) reinforced isotactic polypropylene (iPP) composites via existing thermoplastic processing routes, and to investigate whether this results in significant ...
Particle reinforced metal matrix composites are manufactured by high-pressure infiltration. These composites contain roughly 50% by volume of discrete alumina inclusions dispersed homogeneously in a continuous aluminium-based matrix. Three matrices, namely ...
Hot tearing is one of the most severe defects observed in castings, e.g. in billets or sheet ingots of aluminum alloys produced by DC casting. It is due to both tensile strains and a lack of interdendritic feeding in the mushy zone. In order to predict thi ...
Nowadays the joining of dissimilar materials is often the only solution to fulfill the complex requirements of high technology applications. One of the fields in which the research activity is more intense and promising is that of the brazing of ceramics w ...
The present work is aimed at assessing the feasibility of integrating thermoplastic polypropylene nanocomposite matrices into conventional fiber-reinforced composites based on hybrid textiles that incorporate both the matrix and glass-fiber yarns, in order ...
Search StringAdvanced >
Saved Searches >ARTICLE TOOLSGet PDF (641K)
Save to My Profile
E-mail Link to this Article
Export Citation for this Article
Get Citation Alerts
Request PermissionsMore Sharing ServicesShare
|
Share on citeuli ...
