Publications associées à Apparatus for treating excess intraocular fluid having an elastic membrane

Anomalous dissipation and other non-smooth phenomena in fluids

The thesis is dedicated to the study of two main partial differential equations (PDEs) in fluid dynamics: the Navier-Stokes equations, which describe the motion of incompressible fluids, and the transport equation with divergence-free velocity fields, whic ...

EPFL2024

Large-scale in-silico analysis of CSF dynamics within the subarachnoid space of the optic nerve

Gilles Fourestey

BackgroundImpaired cerebrospinal fluid (CSF) dynamics is involved in the pathophysiology of neurodegenerative diseases of the central nervous system and the optic nerve (ON), including Alzheimer's and Parkinson's disease, as well as frontotemporal dementia ...

BMC2024

Toward Wearable Biosensing by Spectroscopy-free Raman Shift Detection and Soft Optofluidics

Ata Jedari Golparvar

This thesis introduces spectroscopy-free Raman biosensing, which may find increasing use in the next generation of wearable devices for preventive healthcare. While wearables have made substantial advancements in detecting physical biomarkers, they have ye ...

EPFL2024

Numerical simulation of immiscible incompressible viscous, viscoelastic and elastic multiphase flows

Léo Aurélio Diserens

A unified numerical framework is presented for the modelling of multiphasic viscoelastic and elastic flows. The rheologies considered range from incompressible Newtonian or Oldroyd-B viscoelastic fluids to Neo-Hookean elastic solids. The model is formulate ...

EPFL2023

Visualization and modelling of dynamic flow in fibrous preforms for liquid composite molding

Helena Luisa Teixido Pedarros

Nowadays, Liquid Composite Molding techniques are often used to manufacture high quality fiber reinforced composite parts at a relatively low cost. These involve an infiltration process, in which a liquid resin is forced to ingress into a dry fibrous porou ...

EPFL2023

Dielectric Elastomer Actuator-Based Valveless Impedance-Driven Pumping for Meso- and Macroscale Applications

Yves Perriard, Yoan René Cyrille Civet, Thomas Guillaume Martinez, Francesco Clavica, Armando Matthieu Walter, Amine Benouhiba, Silje Ekroll Jahren

Impedance pumps are simple designs that allow the generation or amplification of flow. They are fluid-filled systems based on flexible tubing connected to tubing with different impedances. A periodic off-center compression of the flexible tubing causes the ...

2023

Effect of wettability and textile architecture on fluid displacement and pore formation during infiltration of carbon fibrous preforms

Véronique Michaud, Baris Çaglar, Helena Luisa Teixido Pedarros

We seek to address how air entrapment mechanisms during infiltration are influenced by the wetting characteristics of the fluid and the pore network formed by the reinforcement. To this end, we evaluated the behavior of two model fluids with different surf ...

Elsevier Sci Ltd2023

Rock-Flow Cell Parameters Evaluation Using Ultrasound Doppler Velocimetry

Giovanni De Cesare, Javier Neves da Silva, Andre Luis Stakowian

This work presents a study of two-phase flow generated inside a rock-flow cell setup. It is characterized by a pipe section filled with fluid (oil in our studies) that is put into oscillation around its mass centre by an electric motor. This type of appara ...

2023

Highly Efficient Miniaturized Magnetorheological Valves Using Electropermanent Magnets

Yves Perriard, Christian Köchli, Sofia Lydia Ntella, Adrien Jean-Michel Thabuis, Kenny Jeanmonod, Bhawnath Tiwari

Fluidic systems enable actuation in various applications, such as automotive, medical, and industrial robotics. Miniaturized valves constitute a fundamental controlling element of modern fluidic systems, intriguing the interest of many researchers. This le ...

2023

Three-dimensional buoyant hydraulic fractures: finite volume release

Brice Tanguy Alphonse Lecampion, Andreas Möri

In impermeable media, a hydraulic fracture can continue to expand even without additional fluid injection if its volume exceeds the limiting volume of a hydrostatically loaded radial fracture. This limit depends on the mechanical properties of the surround ...

Cambridge University Press2023