Publications associées à Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

Multimaterial Volumetric Printing of Silica-Based Glasses

Christophe Moser, Paul Delrot, Damien Claude-Marie Loterie, Jorge Andres Madrid Wolff, Antoine Vincent Boniface, Roberto Arturo Emma

Silicate glasses have played a major role as structural and functional materials in human civilization since ancient Egypt. Despite their widespread use and importance in modern society, silica glasses with complex geometries are only fabricated in automat ...

Wiley2024

Influence of Si3N4 fillers and pyrolysis profile on the microstructure of additively manufactured silicon carbonitride ceramics derived from polyvinylsilazane

In this work, various methods were used to improve the printability of a photocurable polyvinylsilazane resin filled with silicon nitride particles for digital light processing. The developed resin was used as a preceramic polymer for polymer-to-ceramic co ...

Taylor & Francis Ltd2024

Digital manufacturing of personalised footwear with embedded sensors

Danick Briand, Rubaiyet Iftekharul Haque, Jaemin Kim, Ryan Mitchell van Dommelen

The strong clinical demand for more accurate and personalized health monitoring technologies has called for the development of additively manufactured wearable devices. While the materials palette for additive manufacturing continues to expand, the integra ...

Nature Research2023

Interlocking modular microfluidic cooling substrates for future high energy physics experiments

Massimo Angeletti

In high energy physics, semiconductor-based sensors are widely used in particle tracking applications. These sensors are typically glued on low-mass cooling substrates, which guarantee the correct thermal management and, at the same time, minimise their in ...

EPFL2023

Controlling the Microstructure and Composition of 3D Printed Soft Load-Bearing Hydrogels

Matteo Hirsch

Hydrogels are among the first materials expressly designed for their use in biomedicine. However, state-of-the-art applications of hydrogels are severely limited because they are typically either too soft or too brittle such that they cannot bear significa ...

EPFL2023

Volumetric additive manufacturing in a scattering resin

Jorge Andres Madrid Wolff

Volumetric 3D printing is a novel technique that offers promising new perspectives in tissue engineering. In volumetric 3D printing, photosensitive gels or liquids are solidified by projecting light patterns via reverse tomography. Recent results show that ...

EPFL2023

A review of materials used in tomographic volumetric additive manufacturing

Christophe Moser, Jorge Andres Madrid Wolff, Riccardo Rizzo

Volumetric additive manufacturing is a novel fabrication method allowing rapid, freeform, layer-less 3D printing. Analogous to computer tomography (CT), the method projects dynamic light patterns into a rotating vat of photosensitive resin. These light pat ...

SPRINGER HEIDELBERG2023

Control of intermetallics in the interface in directed energy deposition of titanium on stainless steel 316L

Di Cui

Application of a single metal or alloy is often restricted by its properties from optimal combination of performance and cost. Therefore, there is a vast need of joining dissimilar metals for various applications in biomedical, aerospace, automobile and ma ...

EPFL2023

The Effect of Y Content on Structural and Sorption Properties of A(2)B(7)-Type Phase in the La-Y-Ni-Al-Mn System

Andreas Züttel, Loris Giovanni Lombardo

Metal hydrides are an interesting group of chemical compounds, able to store hydrogen in a reversible, compact and safe manner. Among them, A(2)B(7)-type intermetallic alloys based on La-Mg-Ni have attracted particular attention due to their high electroch ...

MDPI2023

Robotic Assembly of Integrally-Attached Timber Plate Structures: From Computational Design to Automated Construction

Nicolas Henry Pierre Louis Rogeau

The digitization of timber construction, the emergence of engineered wood products, and the urgent need to drastically reduce buildings' environmental impact have given a rebirth to wood as a construction material. On the one hand, increasing the use of ti ...

EPFL2023