Développement d'un réacteur microstructuré basé sur des filaments métalliques catalytiques
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Hydrogen (H2) has raised considerable interest as a future energy carrier in its application to fuel cell driven vehicles, as it is absolutely free of polluting emissions. However, it is flammable in air and difficult to contain, for which reason innovativ ...
Environmental transmission electron microscopy was used to characterize in situ the reduction and oxidation of nickel from a Ni/YSZ solid oxide fuel cell anode support between 300-500°C. The reduction is done under low hydrogen pressure. The reduction init ...
The Paul Scherrer Institute used to be very active in fuel fabrication R and D using the internal gelation process, which is a promising production method for spherical nuclear fuel. Such fuel kernels can be directly packed in a cylindrical cladding (a sph ...
Four sets of experimental data (total of 658 data points) for heat transfer to liquid metals (NaK of different compositions and Hg) flowing in a triangular or square lattice of cylindrical rods with pitch-to-diameter ratios of 1.1 up to 1.95 for a wide ran ...
Because of the strong asymmetric overcooling effects occurring during a PWR main steam line break (MSLB) event, an accurate analysis of this transient requires the use of 3-D kinetics methods. An assessment has been made of the relative performance of the ...
Environmental transmission electron microscopy was used to characterize in situ the reduction and oxidation of nickel from a Ni/YSZ solid oxide fuel cell anode support between 300-500°C. The reduction is done under low hydrogen pressure. The reduction init ...
The manufacture of chemicals in microstructured reactors (MSR) has become recently a new branch of chemical reaction engineering focusing on process intensification and safety. MSR have an equivalent hydraulic diameter up to a few hundreds of micrometers a ...
Hydrogen production by non-thermal plasma (NTP) assisted direct decomposition of hydrogen sulfide was carried out in a novel dielectric barrier discharge (DBD) reactor with the inner electrode made of sintered metal fibers (SMF) also functioning as catalys ...
This letter extends the work performed at Argonne National Laboratory on the QUADRISO fuel particles concept for High Temperature Reactors. Different configurations of the QUADRISO fuel particles concept are proposed and examined. The concept of QUADRISO f ...
We demonstrate a monolithic polymer electrolyte membrane fuel cell by integrating a narrow (200 mu m) Nafion strip in a molded polydimethylsiloxane (PDMS) structure. We propose two designs, based on two 200 mu m-wide and two 80 mu m-wide parallel microflui ...
