Publications associées à Stability analysis of rough surfaces in adhesive normal contact

Critical degeneracy in a nonlinear hyperbolic equation can produce atypical instability

This paper deals with the initial value problem for a semilinear wave equation on a bounded domain and solutions are required to vanish on the boundary of this domain. The essential feature of the situation considered here is that the ellipticity of the sp ...

2024

Liquid film instability of an internally coated horizontal tube

François Gallaire, Edouard Boujo, Yves-Marie François Ducimetière, Shahab Eghbali

We study numerically and theoretically the gravity-driven flow of a viscous liquid film coating the inner side of a horizontal cylindrical tube and surrounding a shear-free dynamically inert gaseous core. The liquid-gas interface is prone to the Rayleigh-P ...

AMER PHYSICAL SOC2023

On the relationship between the multi-region relaxed variational principle and resistive inner-layer theory

Joaquim Loizu Cisquella, Ankit Kumar

We show that the variational energy principle of the multi-region relaxed magnetohydrodynamic (MRxMHD) model can be used to predict finite-pressure linear tearing instabilities. In this model, the plasma volume is sliced into sub-volumes separated by 'idea ...

2023

The General Crack Component Model for reversed cyclic shear

David Michael Volpe Ruggiero

A growing body of research has shown that reversed cyclic shear loading of reinforced concrete (RC) causes effects that are not accounted for in monotonic behavioral models. Notable among these effects are a reduction in shear strength and significant plas ...

2023

Singular quadratic eigenvalue problems: linearization and weak condition numbers

Daniel Kressner, Ivana Sain Glibic

The numerical solution of singular eigenvalue problems is complicated by the fact that small perturbations of the coefficients may have an arbitrarily bad effect on eigenvalue accuracy. However, it has been known for a long time that such perturbations are ...

SPRINGER2023

Effect of wear particles and roughness on nanoscale friction

Jean-François Molinari, Enrico Milanese, Tobias Brink

Frictional contacts lead to the formation of a surface layer called the third body, consisting of wear particles and structures resulting from their agglomerates. Its behavior and properties at the nanoscale control the macroscopic tribological performance ...

2022

Modeling the origins of adhesive wear across scales

Son-Jonathan Pham-Ba

Friction and wear occur at every interface between solid materials. In the design of mechanical devices, it is desirable to be able to quantify and control the amount of friction and wear, as well as predict their evolution with time. ``Tribology'' is the ...

EPFL2022

Exploring the inner workings of the clove hitch knot

Pedro Miguel Nunes Pereira de Almeida Reis, Paul Johanns, Tomohiko Sano, Paul Grandgeorge, Changyeob Baek

We perform a combined experimental and computational investigation of the clove hitch knot. We develop a physical model for the clove hitch by tying an elastic rod onto a rigid cylinder. In the experiments, we characterize the mechanical performance, geome ...

ELSEVIER2022

Understanding the mechanisms of adhesive wear for heterogeneous materials through atomistic simulations

Jean-François Molinari, Antonio Joaquin Garcia Suarez, Sacha Zenon Wattel

When two rough surfaces slide against each other, two main behaviors can be observed at the asperity level: A ductile behavior where the asperities tend to smooth out or a brittle behavior where the asperities detach and form debris. Recently, a critical l ...

2022

Adhesive wear with a coarse-grained discrete element model

Jean-François Molinari, Son-Jonathan Pham-Ba

The use of molecular dynamics (MD) simulations has led to promising results to unravel the atomistic origins of adhesive wear, and in particular for the onset of wear at nanoscale surface asperities. However, MD simulations come with a high computational c ...

ELSEVIER SCIENCE SA2022