Publications associées à Production of Additive‐Free Amorphous Nanoparticles with a SAW‐Based Microfluidic Spray‐Dryer

Controlling the crystal structure of succinic acid via microfluidic spray-drying

Many properties of materials, including their dissolution kinetics, hardness, and optical appearance, depend on their structure. Unfortunately, it is often difficult to control the structure of low molecular weight organic compounds that have a high propen ...

ROYAL SOC CHEMISTRY2023

Decoding the Mechanisms of Phase Transitions from In Situ Microscopy Observations

Vasiliki Tileli, Reinis Ignatans

Analysis of the temperature- and stimulus-dependent imaging data toward elucidation of the physical transformations is an ubiquitous problem in multiple fields. Here, temperature-induced phase transition in BaTiO3 is explored using the machine learning ana ...

WILEY-V C H VERLAG GMBH2022

Disentangling Light- and Temperature-Induced Thermal Effects in Colloidal Au Nanoparticles

Majed Chergui, Lijie Wang, Davood Zare

We present temperature-dependent (from room temperature to 80 degrees C) absorption spectra of Au/SiO2 core-shell nanoparticles (NPs) (core diameter: similar to 25 nm) in water in the range from 1.5 to 4.5 eV, which spans the localized surface plasmon reso ...

AMER CHEMICAL SOC2022

Fabrication of micrometer-sized drops as templates for particles

Mathias Steinacher

Drops are omnipresent in our daily life for example in the form of rain drops or as oil drops in a salad dressing. On a technological basis, drops can be used to conduct chemical or biological reactions. These drops often serve as templates to produce mate ...

EPFL2021

Systematic investigations of uranium carbide composites oxidation from micro- to nano-scale: Application to waste disposal

Nhât-Tân Vuong

The production of radioisotope beams at the ISOLDE (Isotope Separator OnLine DEvice) facility at CERN is achieved by irradiating target materials (e.g. uranium carbides and metal foils) with protons. The materials are usually operated at temperatures above ...

EPFL2021

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat ...

EPFL2021

Revisiting the concept of extents for chemical reaction systems using an enthalpy balance

Dominique Bonvin, Diogo Filipe Mateus Rodrigues

For the investigation of complex reaction systems, it has been proposed to decouple the various rate processes using a linear time-invariant transformation that is constructed from knowledge of stoichiometry, reaction enthalpies, inlet compositions and tem ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Model-assisted identification of solid oxide cell elementary processes by electrochemical impedance spectroscopy measurements

Jan Van Herle, Stefan Diethelm, Arata Nakajo, Priscilla Caliandro

Electrochemical Impedance Spectroscopy (EIS) is extensively used to characterize Solid Oxide Cells (SOCs) to extract information on the elementary loss mechanisms. However, these individual mechanisms usually overlap in the frequency domain, requiring dedi ...

2019

Reactivity of Bioinspired Magnesium-Organic Networks under CO2 and O-2 Exposure

Klaus Kern, Magalí Alejandra Lingenfelder, Bart Willem Stel, Fernando Pablo Cometto, Daniel Eduardo Hurtado Salinas

Photosynthesis is the model system for energy conversion. It uses CO2 as a starting reactant to convert solar energy into chemical energy, i.e., organic molecules or biomass. The first and rate-determining step of this cycle is the immobilization and activ ...

2019

Direct Synthesis of Selenium Nanowire Mesh on a Solid Substrate and Insights into Ultrafast Photocarrier Dynamics

Jacques-Edouard Moser, Fabien Sorin, Wei Yan, Andrés Burgos Caminal

Selenium (Se) nanowires have generated much interest both for the fundamental understanding of crystal formation and growth and for technological applications in optoelectronics, imaging, piezoelectricity, catalysis, and energy harvesting and storage. Seve ...

2018