The Laguerre model of grain growth in two dimensions II. Examples of coarsening simulations
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
A detailed investigation was carried out to study the effect of volume fraction on microstructure evolution in segregation-free isotropic volume-conserved two-phase alloys. Large scale two-dimensional (2D) and three-dimensional (3D) simulations were perfor ...
Sputter deposited Al(1-x)ScxN thin films with a Sc content from x = 0 to 43 at% are investigated by electron microscopy in order to study and explain the formation and growth of abnormally oriented grains (AOG). It is found that the latter did not nucleate ...
Recrystallization, which can occur dynamically or statically, is an important phenomenon causing microstructure changes in deformed metals and therefore affecting the properties of the material. Even though extensive investigations have been carried out on ...
The microstructure stability during δ sub-solvus annealing in Inconel 718 was investigated, focusing on the conditions that may lead to the development of very large grains (about 100 μm) in a recrystallized fine grained matrix (4 to 5 μm) despite the pres ...
An equilibrated polycrystalline material is considered, containing a small fraction of void space (melt or vapor), for which the crystals are above their roughening transition against this medium. The grain boundaries are approximated to have equal free en ...
Under certain circumstances abnormal grain growth occurs in Nickel base superalloys during thermomechanical forming. Second phase particles are involved in the phenomenon, since they obviously do not hinder the motion of some boundaries, but the key parame ...
An in situ annealing stage has been developed in-house and integrated in the chamber of a Scanning Electron Microscope equipped with an Electron BackScattered Diffraction system. Based on the Joule effect, this device can reach the temperature of 1200°C at ...
Hot tearing is a major defect of solidification processes and welding. It occurs in metallic alloys while they are in the semi-solid state and is caused by a lack of liquid feeding in the mushy zone to compensate solid network openings due to tensile and s ...
Grain-boundary character distributions (GBCDs) were determined for spark plasma sintered Y- and La-doped aluminas prepared at temperatures between 1450 degrees C and 1600 degrees C. La doping leads to grain boundaries that adopt (0001) orientations 3.7 tim ...
In this paper, the results of a 2D full field grain growth model are compared with several 2D mean field grain growth models (Burke and Turbull model and Hillert/Abbruzzese model), using simplified assumptions of isotropic grain boundary energy and mobilit ...
