Kármán vortex shedding in the wake of a 2D hydrofoil: Measurement and numerical simulation
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
The mechanisms that should be considered for separation flow control applications of nanosecond pulsed dielectric barrier discharge (DBD) actuators were investigated on a NACA 0015 profile for velocities of 10 m/s (Re = 100, 000) and 20 m/s (Re = 200, 000) ...
In plunging jets and at hydraulic jumps, large amounts of air bubbles are entrained at the impingement of the liquid jet and receiving body (BIN, 1993; ERVINE, 1998; CHANSON, 2009a). Air is entrapped and advected into a turbulent shear layer with strong in ...
The transition to turbulence in the rotating disk boundary layer is investigated in a closed cylindrical rotor–stator cavity via direct numerical simulation (DNS) and linear stability analysis (LSA). The mean flow in the rotor boundary layer is qualitative ...
In the present paper, Large Eddy Simulations combined with the Zwart-Gerber-Belamri cavitation model are conducted to study the flow characteristics in a tip-leakage flow. A reasonable agreement is obtained between the numerical and experimental data. With ...
The appearance of gas-filled vortices at the tip of hydraulic machines blades is usually associated with increase of losses, vibrations, noise and erosion risk. The understanding of the roll-up region, where the boundary layer on the pressure side crosses ...
In 2050, the European commission plans to achieve actual energetic transition, which contributes in meeting the climate change challenges by moving away from the fossil fuels and by developing a competitive low-carbon economy. As a consequence, a foreseeab ...
Flexible polymer additives are known to reduce the energy dissipation and friction drag in turbulent flows. As the fluid elasticity increases, the flow undergoes several stages of transitions. Much attention in the area has been focused on the onset of dra ...
The dynamics of large-scale coherent structures (LSCS) are investigated in a rough-bed flow over the whole water column and longitudinal and transverse turbulent fluxes of momentum are compared. The relation between LSCS and fluctuations of skin friction a ...
This study assesses the ability of a sensitivity-based, span-wise homogeneous control velocity distributed at the surface of a circular cylinder to cut down the cost of reducing drag by more classical techniques, e.g., base bleed and lateral suction. At Re ...
Free-surface vortices have long been studied to develop an understanding of similar rotating flow phenomena observed in nature and technology. However, a complete description of its turbulent three-dimensional flow field still remains elusive. In contrast, ...