Publications associées à Modeling Vacuum Bellows Soft Pneumatic Actuators with Optimal Mechanical Performance

Highly Efficient Miniaturized Magnetorheological Valves Using Electropermanent Magnets

Yves Perriard, Christian Köchli, Sofia Lydia Ntella, Adrien Jean-Michel Thabuis, Kenny Jeanmonod, Bhawnath Tiwari

Fluidic systems enable actuation in various applications, such as automotive, medical, and industrial robotics. Miniaturized valves constitute a fundamental controlling element of modern fluidic systems, intriguing the interest of many researchers. This le ...

2023

The influence of the gas on the dynamics of cavitation bubbles

Davide Bernardo Preso

Cavitation bubbles, extensively investigated in fluid mechanics, present enduring challenges in hydraulic machinery, while holding considerable potential for practical applications in biomedicine and sonochemistry. Despite more than a century of research, ...

EPFL2023

Fiber pumps for wearable fluidic systems

Herbert Shea, Michael James Henry Smith, Vito Cacucciolo

Incorporating pressurized fluidic circuits into textiles can enable muscular support, thermoregulation, and haptic feedback in a convenient wearable form factor. However, conventional rigid pumps, with their associated noise and vibration, are unsuitable f ...

American Association for the Advancement of Science2023

Research data supporting 'Fiber pumps for wearable fluidic systems'

Herbert Shea, Michael James Henry Smith, Vito Cacucciolo

The dataset supporting 'Fiber pumps for wearable fluidic systems', published in Science in March 2023. In this work, we present a fluidic pump in the form of a flexible and stretchable tube. These tubes - or 'fiber pumps' - can generate significant fluidic ...

2023

Overflow pressure characterization in lined plunge pools for slab sizing

Giovanni De Cesare, Pedro Filipe De Almeida Manso, Francisca Marco Cutillas

This study presents an experimental work on dynamic pressures at the bottom of a lined plunge pool that receives overflow rectangular impinging jets and aims at improving the design criteria for pool slabs. The experiments were conducted in a fairly large ...

International Association for Hydro-Environment Engineering and Research (IAHR)2022

Improving the Accuracy of Fracture Toughness Measurement in Burst Experiments

Guanyi Lu, Yixuan Zhang

Experimental studies suggest that the fracture toughness of rocks increases with the confining pressure. Among many methods to quantify this dependency, a so-called burst experiment (Abou-Sayed, 1978) may be the most widely applied in practice. Its thick w ...

SPRINGER WIEN2022

The concept of the mobilized domain: how it can explain and predict the forces exerted by a cohesive granular avalanche on an obstacle

Christophe Ancey, Johan Alexandre Philippe Gaume, Betty Sovilla, Michael Lukas Kyburz

The calculation of the impact pressure on obstacles in granular flows is a fundamental issue of practical relevance, e.g. for snow avalanches impacting obstacles. Previous research shows that the load on the obstacle builds up, due to the formation of forc ...

2022

Planar hydrodynamic traps and buried channels for bead and cell trapping and releasing

Philippe Renaud, Arnaud Bertsch, Daniel Migliozzi, Clémentine Sophie Sarah Lipp, Jonathan Bastien Cottet

We present a novel concept for the controlled trapping and releasing of beads and cells in a PDMS microfluidic channel without obstacles present around the particle or in the channel. The trapping principle relies on a two-level microfluidic configuration: ...

ROYAL SOC CHEMISTRY2021

Pressure on obstacles induced by granular snow avalanches

Michael Lukas Kyburz

The increasing population and the consequential demand for dwelling and recreation areas lead to more frequent conflicts between humans and natural hazards. In mountainous regions snow avalanches are, therefore, still a major threat to humans and infrastru ...

EPFL2021

Simulating Infiltration as a Sequence of Pinning and De-pinning Processes

Andreas Mortensen, William Craig Carter

The infiltration of a non-wetting liquid, such as molten metal, into a porous solid, such as a ceramic preform, is influenced by the wetting angle of the liquid on the solid. The link between local wetting and the minimum pressure required for initiation o ...

2021