The response of embedded FBG sensors to non-uniform strains in CFRP composites during processing and delamination
Publications associées (531)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
Fibre reinforced materials are increasingly employed in aerospace, naval and civil structures because of their low weight and high specific strength and stiffness. A major concern is the inherent susceptibility of composite laminates to barely visible dama ...
The combined influence of prior plastic strain in austenite and applied stress in the course of the transformation on the crystallographic texture of bainitic steel was studied. The experimental data were obtained using electron back scatter diffraction an ...
Harmonic tension–compression tests at 0.1, 0.5 and 1 Hz on hydrated bovine periodontal ligament (PDL) were numerically simulated. The process was modeled by finite elements (FE) within the framework of poromechanics, with the objective of isolating the con ...
We derive a three-dimensional constitutive theory accounting for length-scale dependent internal residual stresses in crystalline materials that develop due to a non-homogeneous spatial distribution of the excess dislocation (edge and screw) density. The s ...
The main goal of this paper is to shed light on the effect of strain rate and viscoplastic deformation of bulk solder on the interfacial failure of lead-free solder joints. For this purpose, interfacial damage evolution and mode I fracture behavior of the ...
Welding is an important joining method for the work with metals. During the welding process, the material is heated and deforms plastically which leads a change in microstructure in the heat affected zone, to complex residual stress distributions, and dist ...
Fiber bridging is regularly encountered in model delamination tests of unidirectional fiber reinforced composites. However, characterization of the bridging tractions is rather difficult. One way to indirectly evaluate the bridging traction distribution is ...
Over the past decades the use of composite materials has enormously increased, especially in the aeronautical, automotive, and energy production industries. These materials allow to build lighter and larger structures which are more efficient. However, by ...
The effect of temperature on the crack onset strain (COS) of brittle coatings on polymer substrates was investigated through a series of temperature-controlled tensile tests carried out in situ under an optical microscope. It was observed that the failure ...
Fiber-reinforced polymer (FRP) sandwich structures offer several advantages compared to structures made of traditional materials, such as high specific strength, good corrosion resistance, low thermal conductivity and rapid component installation. In this ...