Calibration-Free Calorimeter for Sensitive Loss Measurements: Case of High-Frequency Inductors

Publications associées (31)

Page 3 sur 4

À propos
Confidentialité
Mentions légales

Graph Chatbot

Harmonic Power-Flow Study of Hybrid AC/DC Grids with Converter-Interfaced Distributed Energy Resources

Mario Paolone, Yihui Zuo, Johanna Kristin Maria Becker, Andreas Martin Kettner

As the share of Converter-Interfaced Distributed Energy Resources (CIDERs) in power distribution systems increases, hybrid AC/DC distribution systems are drawing more interest. Indeed, CIDERs usually rely on DC power and hybrid AC/DC grids with few Network ...

IEEE2023

Control upgrade for the TCV coils power supplies

Damien Fasel, Ugo Siravo, Jérémie Dubray, Nicolas Cherix

The Tokamak a` Configuration Variable (TCV) coil converters are fed, during the plasma pulse, by a flywheel generator (FG) providing the AC voltages few seconds before the plasma pulse. The synchronization with the 120 Hz frequency delivered by the FG, var ...

ELSEVIER SCIENCE SA2023

Integrated Electronics for Deep Implants to Remotely Monitor Hemodynamics

Mustafa Besirli

The integration of technology in the medical field has greatly improved accuracy in diagnoses, thus leading to more effective treatments. Wearable and implantable medical devices offer great potential for remote patient monitoring, particularly for heart f ...

EPFL2023

A Delay and Power Efficient Voltage Level Shifter with Low Leakage Power

Alexandre Schmid, Mehdi Saberi

This paper presents a new power-efficient and high-speed voltage level shifter. In the proposed structure, the existing contentions at the internal nodes are reduced using auxiliary transistors and feedback networks, leading to a significant reduction in t ...

IEEE2023

Enablers for Overcurrent Capability of Silicon-Carbide-Based Power Converters: An Overview

Elison de Nazareth Matioli

With the increase in penetration of power electronic converters in the power systems, a demand for overcurrent/ overloading capability has risen for the fault clearance duration. This article gives an overview of the limiting factors and the recent technol ...

IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC2023

First characterization of the SPIDER beam AC component with the Beamlet Current Monitor

SPIDER is the full scale prototype for the ITER Heating Neutral Beam source, hosted at the Neutral Beam Test Facility in Padova, Italy. The behavior of the beam must be thoroughly investigated to bring the machine's performance in line with ITER's requirem ...

2023

Homogenous power distribution along gyrotron collector walls

Stefano Alberti, Jean-Philippe Hogge, Damien Fasel, Ugo Siravo, Jérémie Dubray, Miguel Filipe Silva Füglister, Pierre-François Isoz

EC RF power sources will play a major role in the future operation of large scale tokamaks (ITER, DEMO). A 1MW/170GHz gyrotron is the standard RF power unit considered for ITER. Even though the efficiency of such devices has been significantly increased th ...

2023

First developments towards producing inductive magnetic sensors using state-of-the-art photolithography techniques

Duccio Testa, Marcus Cemes, Ambrine Douhane

Inductive magnetic sensors are needed for tokamak operation to provide the low-frequency (LF) measurements leading to the equilibrium reconstruction and to monitor the higher frequency (HF) instabilities; the HF magnetic sensors are often also used as a ba ...

2023

Frequency Regulation with Storage: On Losses and Profits

Daniel Kuhn, François Richard Vuille, Dirk Lauinger

Low-carbon societies will need to store vast amounts of electricity to balance intermittent generation from wind and solar energy, for example, through frequency regulation. Here, we derive an analytical solution to the decision-making problem of storage o ...

2024

High power mm-wave loss measurements of ITER ex-vessel waveguide components at the FALCON test facility at the Swiss Plasma Center

Timothy Goodman, René Chavan, Avelino Mas Sanchez, Anastasia Xydou, Humberto Torreblanca Quiroz

Many future fusion devices will rely heavily, if not solely, on electron cyclotron (EC) heating subsystems to provide bulk heating, instability control (neoclassical tearing mode (NTM) stabilization), and thermal instability control. Efficient use of the i ...

E D P SCIENCES2023

Page 3 sur 4

High power mm-wave loss measurements of ITER ex-vessel waveguide components at the FALCON test facility at the Swiss Plasma Center

Timothy Goodman, René Chavan, Avelino Mas Sanchez, Anastasia Xydou, Humberto Torreblanca Quiroz

E D P SCIENCES2023