Tensile behaviour of discontinuous two-phase materials
Publications associées (107)
Graph Chatbot
Chattez avec Graph Search
Posez n’importe quelle question sur les cours, conférences, exercices, recherches, actualités, etc. de l’EPFL ou essayez les exemples de questions ci-dessous.
AVERTISSEMENT : Le chatbot Graph n'est pas programmé pour fournir des réponses explicites ou catégoriques à vos questions. Il transforme plutôt vos questions en demandes API qui sont distribuées aux différents services informatiques officiellement administrés par l'EPFL. Son but est uniquement de collecter et de recommander des références pertinentes à des contenus que vous pouvez explorer pour vous aider à répondre à vos questions.
In composite processing, a compressible dry fiber preform is in many cases impregnated by a molten polymeric matrix. The impregnated part is sometimes used as produced, but most often it requires a reheating step before stamping, flow molding or even paint ...
Metal matrix composites are known for their excellent specific mechanical properties. Nevertheless, because of the thermal expansion mismatch between the matrix and the reinforcements, thermal stresses arise at the interfaces of such materials. In order to ...
The mechanical properties of continuous fibre reinforced metals (CFRMs) are known to be very sensitive to the selection and composition of the metallic matrix; for aluminium based CFRMs, commercial alloys are not suitable for this purpose. In the present s ...
A process has been developed where multiple yarns of commingled glass and polypropylene are heated and placed to a desired geometry. The placed unidirectional (UD) tow is then encapsulated by over-moulding with glass mat thermoplastics (GMTs). The effects ...
A multiscale approach to composite failure, in which detailed information on small-scale micromechanics is incorporated approximately yet accurately into larger-scale models capable of simulating extensive damage evolution and ultimate failure, is applied ...
We review the nature of glass transitions and the glasses arising from a square-well potential with a narrow and deep well. Our discussion is based on the mode coupling theory (MCT), and the predictions of glasses that we make refer to the “ideal� glas ...
Al-Cu matrix composites with a high volume fraction of alumina particles (41-62%) prepared by gas-pressure infiltration are characterized in tension and chevron-notch fracture testing before and after heat-treatment. Their mechanical behaviour is shown to ...
Different predictive models-the Maxwell mean field approach, the differential effective medium scheme, the 2- and 3-phase self-consistent, and 3-point model-for the electrical conductivity of two-phase materials are assessed based on electrical conductivit ...
The single-crystal investigation of the self-hosting sigma-structure of beta-tantalum (beta-Ta) at 120 K (low-temperature, LT, structure) and at 293 K (RT-I before cooling and RT-II after cooling and rewarming; RT represents room temperature) shows that th ...
The possibility of decreasing ultimate tensile strength associated with increasing fiber/matrix interfacial sliding is investigated in ceramic-matrix composites. An axisymmetric finite-element model is used to calculate axial fiber stresses versus radial p ...