Publication

Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members

Publications associées (30)

Experimental and analytical investigation of shear-reinforced concrete and dowel action

Codes of practice can be overly conservative, particularly for the shear resistance of reinforced concrete beams with shear reinforcement when large loads act close to supports. This thesis addresses the topic by proposing a refined design approach based o ...

EPFL2024

Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications

Enrique Corres Sojo

Bond between reinforcing bars and concrete has been the focus of extensive research over the last century. This is well-justified as the functioning of reinforced concrete intimately depends on the interaction between rebar and concrete, as for example cra ...

EPFL2024

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Estimation of the bar stress based on crack width measurements in reinforced concrete structures

Aurelio Muttoni, Enrique Corres Sojo

Estimating the stress of reinforcing bars and its variations in service conditions can be useful to determine the reserve capacity of structures or to assess the risk of fatigue in the reinforcement. This paper investigates the use crack width measurements ...

Ernst & Sohn2024

Experimental investigation of dowel action in reinforcing bars using refined measurements

Aurelio Muttoni, Marko Pejatovic

In typical reinforced concrete design, reinforcement is designed to carry axial forces, but it can also resist transversal forces by dowel action. This is usually neglected for simplicity's sake in the design phase, but it can be accounted for either expli ...

Ernst & Sohn2024

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Christian Leinenbach, Rafal Wróbel

Small scale (1:30-1:40) Reinforced Concrete is useful for centrifuge testing. However, manufacturing the reinforcing cages by hand at this scale is practically difficult. This paper suggests that small scale reinforcement can be manufactured using a metal ...

Elsevier Sci Ltd2024

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Diego Hernández Fraile

Reinforced concrete flat slabs consist of a continuous, thin concrete plate that rests on a grid of columns. The supporting surface of the columns is very small compared to the floor plan dimensions, leading to concentrations of shear forces near the colum ...

EPFL2024

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Corentin Jean Dominique Fivet, Maléna Bastien Masse, Julie Rachel Devènes

A large part of building demolitions is motivated by purely socio-economic reasons. Hence, about-to-be-demolished structures, commonly made of reinforced concrete, very often present no or little degradation. When adaptive reuse of the entire building is n ...

2024

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Hisham Tarek Mohamed Hafez

This study deals with a comparison of the environmental performance of one-way slabs utilizing steel fibrereinforced limestone calcined clay cement (LC3) concrete with the control case of Ordinary Portland cement concrete. The experimental program constitu ...

Elsevier Sci Ltd2024

Influence of amount of shear reinforcement and its post-yield response on the shear resistance of reinforced concrete members

Experimental and analytical investigation of shear-reinforced concrete and dowel action

Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Estimation of the bar stress based on crack width measurements in reinforced concrete structures

Experimental investigation of dowel action in reinforcing bars using refined measurements

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Graph Chatbot

Experimental and analytical investigation of shear-reinforced concrete and dowel action

Contributions to rebar-to-concrete interaction and its structural implications for design and monitoring applications

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Estimation of the bar stress based on crack width measurements in reinforced concrete structures

Experimental investigation of dowel action in reinforcing bars using refined measurements

Additively manufactured steel reinforcement for small scale reinforced concrete modeling: Tensile and bond behavior

Shear and steel-fibre reinforcement for the punching resistance of flat slabs at internal and edge columns

Reusability assessment of reinforced concrete components prior to deconstruction from obsolete buildings

Structural component reuse of precast and cast-in-place reinforced concrete in architecture since the late 1960s in Europe

Decarbonization potential of steel fibre-reinforced limestone calcined clay cement concrete one-way slabs

Structural component reuse of precast and cast-in-place reinforced concrete in architecture since the late 1960s in Europe