Recherche

Accueil

Publication

Screw dislocation cross slip at cross-slip plane jogs and screw dipole annihilation in FCC Cu and Ni investigated via atomistic simulations

Publications associées (30)

Theory of kink migration in dilute BCC alloys

Plastic deformation in elemental BCC metals and dilute alloys is controlled by the slower of the kink pair nucleation and kink migration processes along screw dislocations. In alloys nucleation is facilitated and migration inhibited, leading to a concentra ...

2021

Theory of twin strengthening in fcc high entropy alloys

William Curtin, Recep Ekin Kubilay

Twinning in fcc High Entropy Alloys (HEAs) has been implicated as a possible mechanism for hardening that enables enhanced ductility. Here, a theory for the twinning stress is developed analogous to recent theories for yield stress. Specifically, the stres ...

2021

Modeling peak-aged precipitate strengthening in Al–Mg–Si alloys

William Curtin, Yi Hu

Strengthening by needle-shaped precipitates is critical in Al–Mg–Si alloys. Here, the strengthening is studied computationally at the peak-aged condition where precipitate shearing and Orowan looping are usually considered to have equal strengths. Pseudo-r ...

2021

Page 3 sur 3

À propos
Confidentialité
Mentions légales

Graph Chatbot

Structure analysis of beta dicalcium silicate via scanning transmission electron microscope (STEM)

Franco Alberto Zunino Sommariva, Qiao Wang, Junying Zhao, Chaoqi Shi

Beta-dicalcium silicate (beta-C2S), one of the main phases in Portland cement clinker, offers some promising overviews regarding CO2 and energy savings potential compared to alite. Understanding the crystalline structure and reactive sites on beta-C2S surf ...

ELSEVIER SCI LTD2022

Theory of kink migration in dilute BCC alloys

William Curtin, Alireza Ghafarollahi

2021

High energy barriers for edge dislocation motion in body-centered cubic high entropy alloys

William Curtin, Recep Ekin Kubilay, Francesco Maresca, Alireza Ghafarollahi

Recent theory proposes that edge dislocations in random body-centered cubic (BCC) high entropy alloys have high barriers for motion, conveying high strengths up to high temperatures. Here, the energy barriers for edge motion are computed for two model allo ...

NATURE RESEARCH2021

Theory of twin strengthening in fcc high entropy alloys

William Curtin, Recep Ekin Kubilay

2021

Deciphering the interactions between single arm dislocation sources and coherent twin boundary in nickel bi-crystal

Helena Van Swygenhoven

The introduction of a well-controlled population of coherent twin boundaries (CTBs) is an attractive route to improve the strength ductility product in face centered cubic (FCC) metals. However, the elementary mechanisms controlling the interaction between ...

Nature Research2021

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

Roland Logé, Johann Michler, Xavier Maeder, Amit Sharma, Daniele Casari, Nicolò Maria Della Ventura

An SEM in situ uniaxial tensile testing setup allowing HR-EBSD acquisition during deformation was used to study the extension twinning mechanism in magnesium(Mg) at the micron scale. Structures were fabricated with two different crystal orientations, respe ...

2021

Brittle faulting of ductile rock induced by pore fluid pressure build‐up

Marie Estelle Solange Violay, François Xavier Thibault Passelègue, Corentin Jean-Marie Rémi Noël

Under upper crustal conditions, deformations are primarily brittle (i.e., localized) and accommodated by frictional mechanisms. At greater depth, deformations are ductile (i.e., distributed) and accommodated by crystal plasticity, diffusion mass transfer o ...

2021

Modeling peak-aged precipitate strengthening in Al–Mg–Si alloys

William Curtin, Yi Hu

2021

Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718

Roland Logé, Mathijs Pieter van der Meer

In this article, the Joule effect heating influence on recrystallization phenomena in the Inconel 718 nickel-based superalloy is investigated in details. On the one hand, static recrystallization kinetic studies at 1020 degrees C after cold deformation up ...

SPRINGER2021

Atomic scale investigations of fracture in metal alloys

Eleanor Yi Kei Mak

The demand for metal alloys with superior structural performance in industrial applications continues to increase, as does the need for more-energy efficient materials and methods. Many materials that are otherwise attractive for structural applications ar ...

EPFL2021

Page 3 sur 3

{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions

Roland Logé, Johann Michler, Xavier Maeder, Amit Sharma, Daniele Casari, Nicolò Maria Della Ventura

2021