Publication

Review on the EFDA work programme on nano-structured ODS RAF steels

Publications associées (28)

Giant hardening response in AlMgZn(Cu) alloys

William Curtin, Daniel John Gilles Marchand

This study presents a thermomechanical processing concept which is capable of exploiting the full industrial application potential of recently introduced AlMgZn(Cu) alloys. The beneficial linkage of alloy design and processing allows not only to satisfy th ...

PERGAMON-ELSEVIER SCIENCE LTD2021

Cyclic metal plasticity model parameters with limited information: a constrained optimization approach

Dimitrios Lignos, Albano António De Abreu E Presa De Castro E Sousa, Alexander Riley Hartloper

Tensile test data for structural steels are ubiquitous. Yet, the information monotonic loading provides with respect to the material's characteristics is limited. Notably, features of inelastic response to cyclic loading, such as the Bauschinger eect, can ...

2021

Atomic scale investigations of fracture in metal alloys

Eleanor Yi Kei Mak

The demand for metal alloys with superior structural performance in industrial applications continues to increase, as does the need for more-energy efficient materials and methods. Many materials that are otherwise attractive for structural applications ar ...

EPFL2021

Microstructural Evolution Study of Fe-Mn-Al-C Steels Through Variable Thermomechanical Treatments

Roland Logé, Oscar Zambrano Zambrano

The microstructural evolution of the two austenitic alloys Fe-20Mn-3Al-0.7C wt pct and Fe-20Mn-6Al-0.7C wt pct when different thermal and thermomechanical treatments are performed has been studied. To this end, a generic industrial die of 100 ton capacity ...

SPRINGER2021

Early Precipitation Stages of Sigma Phase in Alloy 28 Studied with Scanning Electron Microscopy and Atom Probe Tomography

This study deals with early stages of sigma phase growth in a high end austenitic stainless steel - Alloy 28 (EN 1.4563/UNS N08028). Its precipitation kinetics was followed by a series of heat treatments at 800 degrees C for holding times up to 30 000 s. T ...

2021

Shear behavior of single- and triple-thickness masonry panels strengthened by bed-joint structural repointing

Ricardo Javier Serpell Carriquiry

Bed-joint structural repointing is a widely used strengthening technique in historic masonry constructions, particularly in applications where the material appearance needs to be preserved. Despite its wide use, limited research is available on the effecti ...

ELSEVIER SCI LTD2021

Measurement and prediction of the transformation strain that controls ductility and toughness in advanced steels

William Curtin, Helena Van Swygenhoven, Francesco Maresca, Efthymios Polatidis

New-generation multi-phase martensitic steels derive their high strength from the body-centered cubic (BCC) phase and high toughness from transformation of the metastable face-centered cubic (FCC) austenite that transforms into martensite upon loading. In ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Solute-dislocation interactions and creep-enhanced Cu precipitation in a novel ferritic-martensitic steel

Roland Logé, Cyril Cayron, Bo Xiao

G115 steel has gained a growing interesting recently for its use in next-generation ultra-supercritical power plant applications. Due to the high densities of dislocations and lath martensite boundaries in G115 steel, interactions between solutes and dislo ...

PERGAMON-ELSEVIER SCIENCE LTD2020

Steel column stability and implications in the seismic assessment of steel structures according to Eurocode 8 Part 3

Dimitrios Lignos, Alexander Riley Hartloper

Seismic performance assessment of new and existing steel structures based on nonlinear static (pushover) analysis necessitates the use of engineering‐oriented models that trace the nonlinear response of structural steel elements under static and cyclic loa ...

2020

First principles study of the effect of hydrogen in austenitic stainless steels and high entropy alloys

William Curtin, Xiao Zhou

Hydrogen (H) embrittlement in multicomponent austenitic alloys is a serious limitation to their application in many environments. Recent experiments show that the High-Entropy Alloy (HEA) CoCrFeMnNi absorbs more H than 304 Stainless Steel but is less prone ...

2020