Abaqus models and input files for simplified micro models of in-plane loaded masonry walls

Publications associées (30)

À propos
Confidentialité
Mentions légales

Graph Chatbot

Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression

Aurelio Muttoni, Xhemsi Malja, Miguel Fernández Ruiz

As acknowledged explicitly or implicitly in most of current design codes, a high level of sustained loading has a detrimental effect on the concrete compressive strength. However, its beneficial effect in terms of deformation capacity is neglected in most ...

ERNST & SOHN2022

Investigation of the effect of mineral dissolution on the geomechanical behaviour of geomaterials

Taeheon Kim

Geotechnical engineering scenarios engaged in internal erosion or mineral dissolution were found worldwide, from CO2 sequestration projects to internal erosion of earth dams. Materials subjected to loss of solid phase from their internal fabric vary from s ...

EPFL2022

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

The increasing usage of nonlinear analyses for the design of reinforced concrete structures and the necessity of codes of practice to provide a consistent safety format for them is one of the challenges that new generations of codes of practice are facing. ...

ELSEVIER SCI LTD2022

Data-driven numerical site response

Jean-François Molinari, Antonio Joaquin Garcia Suarez, Sacha Zenon Wattel

Prediction of ground motion triggered by earthquakes is a prime concern for both the seismology community and geotechnical earthquake engineering one. The subfield occupied with such a problem is termed site response analysis (SRA), its one-dimensional fla ...

2022

Multi-scale experimental testing on variable stiffness and damping components for semi-active structural control

Gennaro Senatore

This paper presents experimental testing of a new semi-active vibration control device comprising a shape memory polymer (SMP) core that is reinforced by an SMP-aramid composite skin. This control device works as a load-transfer component that can be integ ...

ELSEVIER SCI LTD2022

Magneto-active elastic shells with tunable buckling strength

Pedro Miguel Nunes Pereira de Almeida Reis, Matteo Pezzulla, Dong Yan, Arefeh Abbasi

Shell buckling is central in many biological structures and advanced functional materials, even if, traditionally, this elastic instability has been regarded as a catastrophic phenomenon to be avoided for engineering structures. Either way, predicting crit ...

Nature Research2021

Design and temporal issues in Soil Bioengineering structures for the stabilisation of shallow soil movements

Giovanni De Cesare, Massimiliano Schwarz

In the last decades, soil bioengineering has gained considerable popularity worldwide, especially in hillslope, riverbank, and earth embankment stabilisation works. The use of plants as a building material transfers the plant multifunctionality within engi ...

2021

Accurate isogeometric methods for trimmed shell structures

Luca Coradello

Shell elements derived from the Kirchhoff-Love theory have experienced a renaissance in the Finite Element community since the advent of isogeometric analysis. Despite numerous promising advancements in the field, several questions need to be addressed to ...

EPFL2021

Combined Shear-Flexural Verification Of In Plane Loaded Reinforced And Unreinforced Masonry Walls

Lorenzo Benedetti

The safety verification of in-plane loaded masonry panels requires the evaluation of at least three different collapse conditions connected with overturning, shear sliding, and shear - compression failure at the panels' toe. In reinforced panels, the resis ...

INT CENTER NUMERICAL METHODS ENGINEERING2021

Structured light engineering using a photonic nanojet

Toralf Scharf, Maryam Yousefi, Daniel Necesal

In this Letter, we present the photonic nanojet as a phenomenon in a structured light generator system that is implemented to modify the source focal spot size and emission angle. The optical system comprises a microlens array that is illuminated by a focu ...

OPTICAL SOC AMER2021

Page 2 sur 3

Influence of sustained loading on resistance and deformation capacity of reinforced concrete members in compression

Aurelio Muttoni, Xhemsi Malja, Miguel Fernández Ruiz

ERNST & SOHN2022

Investigation of the effect of mineral dissolution on the geomechanical behaviour of geomaterials

Taeheon Kim

EPFL2022

Considerations on the partial safety factor format for reinforced concrete structures accounting for multiple failure modes

Aurelio Muttoni, Miguel Fernández Ruiz, Qianhui Yu

ELSEVIER SCI LTD2022