Publication

Megapixel per second hardware efficient LiDAR based on microcombs

Publications associées (31)

Third-harmonic generation monitoring of femtosecond-laser-induced in-volume functional modifications

Christian Enz, Yves Bellouard, Assim Boukhayma, Andrea Kraxner, Olivier Bernard

During the last two decades, ultrafast in-volume laser-based processing of transparent materials has emerged as a key 3D-printing method for manufacturing a variety of complex integrated photonic devices and micro-parts. Yet, identifying suitable laser pro ...

2023

Single-frequency violet and blue laser emission from AlGaInN photonic integrated circuit chips

Tobias Kippenberg, Anat Siddharth

Chip-based, single-frequency and low phase-noise integrated photonic laser diodes emitting in the violet (412 nm) and blue (461 nm) regime are demonstrated. The GaN-based edge-emitting laser diodes were coupled to high-quality on-chip micro-resonators for ...

Optica Publishing Group2023

Defect formation and mitigation during laser powder bed fusion of copper

Carl Tore Viktor Lindström

Additive manufacturing (AM) is a group of processing technologies which has the potential to revolutionize manufacturing by allowing easy manufacturing of complex shapes and small series. One AM-method which is of high interest for processing of metals is ...

EPFL2021

Liouvillian spectral collapse in the Scully-Lamb laser model

Fabrizio Minganti

Phase transitions of thermal systems and the laser threshold were first connected more than forty years ago. Despite the nonequilibrium nature of the laser, the Landau theory of thermal phase transitions, applied directly to the Scully-Lamb laser model (SL ...

AMER PHYSICAL SOC2021

Optical frequency comb based parallel fm lidar

Tobias Kippenberg, Anton Lukashchuk

In a LIDAR device (100) a laser light source (110) generates first laser light having a first laser frequency which is frequency modulated with a first frequency modulation. A non-linear optical element (120) receives the first laser light and generates th ...

2021

Microfabricated nanomotion detectors for rapid cells viability tests

Anton Malovichko

The widespread use of antibiotics and antifungal drugs has provoked an increasing number of multi-resistant bacteria and fungi. The emergence of multiresistance to antibiotics has been now recognized as a very serious public health issue. In order to targe ...

EPFL2021

Direct time-of-flight SPAD image sensors for light detection and ranging

Preethi Padmanabhan

Depth sensing is an increasingly important feature in many applications of consumer, automotive, augmented/virtual reality (AR-VR), space and bio-medical imaging. Long range, high depth resolution, high spatial resolution, and high frame rates are often co ...

EPFL2021

Adaptive Laser Welding Control: A Reinforcement Learning Approach

Silvio Zanoli, Giulio Masinelli

Despite extensive research efforts in the field of laser welding, the imperfect repeatability of the weld quality still represents an open topic. Indeed, the inherent complexity of the underlying physical phenomena prevents the implementation of an effecti ...

2020

An effective rule for translating optimal selective laser melting processing parameters from one material to another

Roland Logé, Jamasp Jhabvala, Eric Boillat, Rita Drissi Daoudi, Hossein Ghasemi Tabasi, Toni Ivas

Selective Laser Melting (SLM) or Laser Powder Bed Fusion (L-PBF) is the most studied laser-based additive manufacturing process for metals and alloys. One important issue in SLM is the time-consuming identification of a process window leading to quasi full ...

2020

Laser coating of a Zr-based metallic glass on an aluminum substrate

Roland Logé, Stefano Mischler, Jamasp Jhabvala, Alejandro Roda Buch, Navid Sohrabi

Cladding of a Zr-based metallic glass (MG) on an aluminum substrate was conducted using a layer-wise laser additive manufacturing (AM) method, leading to relative densities higher than 99%. The thickness of the cladding was about 300 μm. The effect of lase ...

2020