A novel approach for SPICE modeling of light and radiation effects in ICs

Modeling the interaction of ionizing radiation, either light or ions, in integrated circuits is essential for the development and optimization of optoelectronic devices and of radiation-tolerant circuits. Whereas for optical sensors photogenerated carriers play an essential role, high energy ionizing particles can be a severe issue for circuits, as they create high density of excess carriers in ICs substrate, causing parasitic signals. In particular, recent advances in CMOS scaling have made circuits more sensitive to errors and dysfunctions caused by radiation-induced currents, even at the ground level. TCAD simulations of excess carriers generated by light or radiation are not dedicated to large scale circuit simulations since only few devices can be simulated at a time and computation times are too long. Conversely, SPICE simulations are faster, but their accuracy is strictly dependent on the correctness of the compact models used to describe the devices, especially when dealing with photocurrents and parasitic radiation-induced currents. The objective of this thesis is to develop a novel modeling approach for SPICE-compatible simulations of electron-hole pairs generated by light and by high energy particles. The approach proposed in this work is based on the Generalized Lumped Devices, previously developed to simulate parasitic signals in High Voltage MOSFET ICs. Here, the model is extended to include excess carriers generation. The developed approach allows physics-based simulations of semiconductor structures, hit by light or radiation, that can be run in standard circuit simulators without the need for any empirical parameter, only relying on the technological and geometrical parameters of the structure, and without any predefined compact model. The model is based on a coarse mesh of the device to obtain an equivalent network of Generalized Lumped Devices. The latter predicts generation of excess carriers and their propagation, recombination and collection at circuit nodes through the definition of equivalent voltages, proportional to the excess carrier concentrations, and equivalent currents, proportional to the excess carrier gradients. The model is validated with Sentaurus TCAD numerical simulations for different scenarios. Regarding light effects, the proposed strategy is applied to simulate various optoelectronic devices. Complete DC I-V characteristics of a solar cell and transient response of a photodiode are studied. Next, phototransistors are considered. After, a full pixel of a 3T-APS CMOS image sensor is analyzed. The photosensing device, described with Generalized Devices, is co-simulated with the in-pixel circuit, described with compact models. The impact of semiconductor parameters on pixel output and on crosstalk between adjacent pixels is predicted. Finally, radiation-induced soft errors in ICs are examined. Alpha particles at different energies hitting the substrate are simulated. Parasitic currents collected at contacts a