Jean-Philippe AnsermetJean-Philippe Ansermet was born March 1, 1957 in Lausanne (legal origin Vaumarcus, NE). He obtained a diploma as physics engineer of EPFL in 1980. He went on to get a PhD from the University of Illinois at Urbana-Champaign where, from 1985 to 1987, he persued as post-doc with Prof. Slichter his research on catalysis by solid state NMR studies of molecules bound to the surface of catalysts. From 1987 to 1992 he worked at the materials research center of Ciba-Geigy, on polymers for microelectronics, composites, dielectrics and organic charge transfer complexes. In March 1992, as professor of experimental physics, he developed a laboratory on the theme of nanostructured materials and turned full professor in 1995. Since 1992, he teaches classical mechanics, first to future engineering students, since 2004 to physics majors. Since 2000, he teaches thermodynamics also, to the same group of students. He offers a graduate course in spintronics, and another on spin dynamics. His research activities concern the fabrication and properties of magnetic nanostructures produced by electrodeposition. His involvement since the early days of spintronics have allowed him to gain recognition for his work on giant magnetoresistance (CPP-GMR), magnetic relaxation of single nanostructures, and was among the leading groups demonstrating magnetization reversal by spin-polarized currents. Furthermore, his group uses nuclear magnetic resonance , on the one hand as means of investigation of surfaces and electrodes, on the other hand, as a local probe of the electronic properties of complex ferromagnetic oxides.
Thierry MeyerOriginaire de Genève, né en 1961, Thierry Meyer reçoit en 1986 son diplôme (MSC) dingénieur chimiste de lEcole Polytechnique Fédérale de Lausanne (EPFL). Il reçoit en 1989 son doctorat (PhD) à EPFL pour sa thèse sur le micromélange dans des milieux fortement visqueux. Il rejoint l'institut du génie chimique de 1989 jusqu'à 1993 en tant que scientifique senior dans le domaine des réactions de polymérisation. Il entre, en 1994, à la division " Pigments " de Ciba-Geigy SA, où il travaille au développement et à la mise en production de plusieurs pigments de hautes performances. Il assume la fonction de chef de projets pour l'introduction de nouveaux pigments en fabrication. En 1997, il est nommé chef de fabrication pour la production de la division pigments de Ciba Spécialités Chimiques SA à Monthey. Il est pendant cette même période nommé chargé de cours à l'EPFL. Retournant à l'institut du génie chimique d'EPFL à Lausanne vers la fin de 1998, il a été nommé « d'enseignement de maître et de recherche » (MER) pour mener un nouveau groupe de recherche dans le domaine des polymères et les fluides supercritiques, et enseigner aux chimistes, ingénieurs chimistes et en sciences des matériaux, les disciplines telles que le développement de procédés, l'introduction au génie chimique, le chimie organique et des polymères au programme de bachelor et master. En 2005 il assume la responsabilité du service de Sécurité et Santé au Travail de la faculté des sciences de base en plus de ses activités de recherches traitant de la gestion des risques (risk management) et des fluides supercritiques. Il enseigne actuellement l'introduction au génie chimique au niveau bachelor, le risk management au niveau master et des cours de formation continue dans le domaine de la sécurité (safety) et de la gestion des risques (engineering risk management). Il agit également comme consultant et expert en matière de risk management et génie chimique auprès du tribunal de l'ICC (chambre de commerce internationale) du World Business Organization, auprès de plusieurs bureaux d'études et de consultants ainsi quauprès dindustries. Thierry Meyer est actuellement membre de plusieurs associations internationales de la fédération Européenne du génie chimique et de la société chimique Américaine et American Institute of Chemical Engineers. Il a été élu Président de la European Working Party on Polymer Reaction Engineering de 2001 jusqu'à 2006. Il est actuellement le représentant académique Suisse dans la European Working Party on Loss Prevention and Safety Promotion et dans la European Working Party on Education. Il est membre de plusieurs editorial boards: Chemical Engineering Research and Design, Macromolecular Reaction Engineering, Chemical Engineering and Technology, Journal of Chemical Health and Safety.
Anton SchleissProf. Dr. Anton J. Schleiss graduated in Civil Engineering from the Swiss Federal Institute of Technology (ETH) in Zurich, Switzerland, in 1978. After joining the Laboratory of Hydraulic, Hydrology and Glaciology at ETH as a research associate and senior assistant, he obtained a Doctorate of Technical Sciences on the topic of pressure tunnel design in 1986. After that he worked for 11 years for Electrowatt Engineering Ltd. (now Pöyry) in Zurich and was involved in the design of many hydropower projects around the world as an expert on hydraulic engineering and underground waterways. Until 1996 he was Head of the Hydraulic Structures Section in the Hydropower Department at Electrowatt. In 1997, he was nominated full professor and became Director of the Laboratory of Hydraulic Constructions (LCH) in the Civil Engineering Department of the Swiss Federal Institute of Technology Lausanne (EPFL). The LCH activities comprise education, research and services in the field of both fundamental and applied hydraulics and design of hydraulic structures and schemes. The research focuses on the interaction between water, sediment-rock, air and hydraulic structures as well as associated environmental issues and involves both numerical and physical modeling of water infrastructures. In May 2018, he became Honorary Professor at EPFL. More than 50 PhD and Postdoc research projects have been carried out under his guidance. From 1999 to 2009 he was Director of the Master of Advanced Studies (MAS) in Water Resources Management and Hydraulic Engineering held in Lausanne in collaboration with ETH Zurich and the universities of Innsbruck (Austria), Munich (Germany), Grenoble (France) and Liège (Belgium). From 2006 to 2012 he was the Head of the Civil Engineering program of EPFL and chairman of the Swiss Committee on Dams (SwissCOLD). In 2006, he obtained the ASCE Karl Emil Hilgard Hydraulic Price as well as the J. C. Stevens Award. He was listed in 2011 among the 20 international personalities that “have made the biggest difference to the sector Water Power & Dam Construction over the last 10 years”. Between 2014 and 2017 he was Council member of International Association for Hydro-Environment Engineering and Research (IAHR) and he was chair of the Europe Regional Division of IAHR until 2016. For his outstanding contributions to advance the art and science of hydraulic structures engineering he obtained in 2015 the ASCE-EWRI Hydraulic Structures Medal. The French Hydro Society (SHF) awarded him with the Grand Prix SHF 2018. After having served as vice-president between 2012 and 2015 he was president of the International Commission on Large Dams (ICOLD) from 2015 to 2018. On behalf of ICOLD he his the coordinator of the EU Horizon 2020 project "Hydropower Europe". With more than 40 years of experience he is regularly involved as a consultant and expert in large water infrastructures projects including hydropower and dams all over the world. Awards (besides those mentioned above): ASCE-Journal of Hydraulic Engineering Outstanding Reviewer Recognition 2013 ASCE-EWRI-Journal of Hydraulic Engineering 2014 Best Technical Note
Dusan LicinaDusan Licina is a Tenure Track Assistant Professor of Indoor Environmental Quality at the School for Architecture, Civil, and Environmental Engineering (ENAC) at EPFL. He leads the Human-Oriented Built Environment Lab (HOBEL) in Fribourg since 1 June 2018. Dusan’s research and teaching are driven by the need to advance knowledge of the intersections between people and the built environment in order to ensure high indoor environmental quality for building occupants with minimum energy input. His research group specializes in air quality engineering, focusing on understanding of concentrations, dynamics and fates of air pollutants within buildings, and development and application of methods to quantitatively describe relationships between air pollution sources and consequent human exposures. His research interests also encompass optimization of building ventilation systems with an aim to improve air quality and thermal comfort in an energy-efficient manner. Throughout his career, Dusan specialized in air quality engineering, focusing on sources and transport of air pollutants in buildings, human exposure assessment, and optimization of building ventilation systems with an aim to improve air quality. Dusan completed my joint Doctorate degree at the National University of Singapore and Technical University of Denmark. He was formerly master and bachelor student in Mechanical Engineering at the University of Belgrade, Serbia. Prior to joining EPFL, Dusan worked for 3.5 years in the USA, first he was a postdoctoral researcher at the University of California Berkeley, and then he served as director on the standard development team at International WELL Building Institute (IWBI) in New York. Dusan is the recipient of several honors and awards, including Ralph G. Nevin’s award by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) given in recognition of significant accomplishment in the study of human response to the environment. He is editorial board member of the highly acclaimed Indoor Air journal. He is passionate about raising awareness about the air quality issues worldwide and developing buildings that are not only energy efficient, but that also contribute to “Michelin Star” indoor air quality.
Yves LeterrierYves Leterrier joined EPFL in 1993 and is a faculty member of the Materials Institute. He is a senior scientist and lecturer in the Laboratory for Processing of Advanced Composites (LPAC, previously Laboratory of Composite and Polymer Technology, LTC). Activities
2000-2005: Foundation and Chair of the Korea-Switzerland joint symposia on materials and micro-technologies2004-2008: Board member of FLEXIDIS (the European flexible display consortium) 2004-2009: Group leader on lightweight materials for Solar ImpulseSince 2008: Board member of the French Adhesion SocietySince 2000: President of the EPFL Materials Science Library commissionSince 2012: Editorial board member, Applied Surface ScienceSince 2014: Associate Editor, Frontiers in MaterialsSince 2021: Coordinator of the EPFL Minor on 'Engineering for Sustainability'
Background
1987: MS in materials science and solid state physics (INPL, France) 1991: PhD in materials science (Ecole des Mines, INPL, France) 1992: Research Associate, National Institute of Standards and Technology (NIST, USA)
