Laboratoire des polymeres | EPFL Graph Search

À propos de ce résultat

Cette page est générée automatiquement et peut contenir des informations qui ne sont pas correctes, complètes, à jour ou pertinentes par rapport à votre recherche. Il en va de même pour toutes les autres pages de ce site. Veillez à vérifier les informations auprès des sources officielles de l'EPFL.

Actuator, valve actuator unit and valve

Fabio Beco Albuquerque, Herbert Shea

An actuator (22) comprises at least one actuator body (32) of dielectric elastomeric material and two electrodes (34, 36) being attached to opposite surfaces of the actuator body (32), respectively. At least one of the actuator body (32) and at least one of the electrodes (34, 36) is at least partly covered at its outer side with a protective layer (38a, 38b) of polymer material, wherein a mechanical stiffness of the protective layer (38a, 38b) is at least three times lower than a mechanical stiffness of the actuator body (32). Moreover, a valve actuator unit comprises such an actuator (22) and a housing, wherein the actuator (22) is arranged within the housing and the remainder of the housing is filled with a gas. Additionally, a valve comprises such a valve actuator unit and a valve element, wherein the valve element is movable by the valve actuator unit.

2022

Preparation and Analysis of Bacteria Surface-Modified with Polymer Nanoparticles

Lisa Patricia Elisabeth Bader

Cell-based drug carriers present an interesting approach to improve the targeted delivery of therapeutic drugs in vivo. Specifically, bacterial cells possess interesting properties such as motility and sensing that allow some strains to selectively target tumor areas. Immobilization of abiotic materials on the cell surface of such bacterial cells can therefore enable the delivery of therapeutic compounds at the desired location. The work presented in this thesis explores the fabrication and characterization of bacteria-nanoparticle biohybrids as potential carriers for drug delivery applications.Chapter 1 presents a review of the scientific literature that covers the different approaches to immobilize abiotic materials on the surface of bacteria. It highlights the advantages of using cells as carriers for the transport of therapeutics. An effective drug delivery agent should present great motility, viability, biodistribution and biocompatibility with human cells. Examples of various chemical approaches to surface-modify bacteria are presented. Chapter 2 systematically explores the immobilization of polystyrene nanoparticles on the surface of Escherichia coli (E. coli) and Salmonella typhimurium (Salmonella) cells. We compared the nanoparticle immobilization using four different conjugations strategies (electrostatic, covalent and ligand-ligand) and characterized the bio-hybrids systems using flow cytometry and confocal microscopy. Two different microscopy techniques were used: the first was based on 3D-reconstruction of z-stacks of single bacterium to investigate position of nanoparticles on the membrane; the second allowed for a large screening of bacteria followed by image processing determining the area of bacteria covered by nanoparticles. We observed that the efficiency of the surface modification is correlated to the initial nanoparticle/cell ratio and that non-covalent strategies allowed for increased number of biohybrids formed and nanoparticle attached. This study provides an overview of the variety of conjugation strategies (and their conjugation efficiencies) available for fabricating nanoparticle-decorated bacteria and presents us an opportunity to better understand and design bacteria-based target-specific drug delivery systems.Chapter 3 presents the characterization of the previously developed bacteria-nanoparticle biohybrids as potential carriers for nanoparticle transport. The viability of the various conjugates was determined by flow cytometry indicating a decrease in cell viability with increasing numbers of nanoparticles immobilized on the membrane. The motility was studied to investigate the impact of nanoparticle attachment on the bacterial velocity as well as the capacity to transport the cargo. Bacteria were able to transport nanoparticles when prepared with low ratios of nanoparticle/cell.

EPFL2022

Sustainable polyesters via direct functionalization of lignocellulosic sugars

Adrien Julien Demongeot, Graham Reid Dick, Maxime Alexandre Clément Hedou, Harm-Anton Klok, Yves Leterrier, Jeremy Luterbacher, François Maréchal, Véronique Michaud, Thibault Rambert, Christèle Rayroud

The development of sustainable plastics from abundant renewable feedstocks has been limited by the complexity and efficiency of their production, as well as their lack of competitive material properties. Here we demonstrate the direct transformation of the hemicellulosic fraction of non-edible biomass into a tricyclic diester plastic precursor at 83% yield (95% from commercial xylose) during integrated plant fractionation with glyoxylic acid. Melt polycondensation of the resulting diester with a range of aliphatic diols led to amorphous polyesters (Mn = 30–60 kDa) with high glass transition temperatures (72–100 °C), tough mechanical properties (ultimate tensile strengths of 63–77 MPa, tensile moduli of 2,000–2,500 MPa and elongations at break of 50–80%) and strong gas barriers (oxygen transmission rates (100 µm) of 11–24 cc m−2 day−1 bar−1 and water vapour transmission rates (100 µm) of 25–36 g m−2 day−1) that could be processed by injection moulding, thermoforming, twin-screw extrusion and three-dimensional printing. Although standardized biodegradation studies still need to be performed, the inherently degradable nature of these materials facilitated their chemical recycling via methanolysis at 64 °C, and eventual depolymerization in room-temperature water.

2022

Preparation and Analysis of Bacteria Surface-Modified with Polymer Nanoparticles

Lisa Patricia Elisabeth Bader

EPFL2022