Analog microelectronic emulation for dynamic power system computation

Power system dynamic simulators can be classified according to multiple criteria, including speed, precision, cost and modularity (topology, characteristics and model). Existing simulators are based on time-consuming numeric algorithms, which provide very precise results. But the evolution of the power grid constantly changes the requirements for simulators. In fact, power consumption is steadily increasing; therefore, the power system is always operating closer to its limits. Moreover, focus is put on decentralized and stochastic green energy sources, leading to a much more complex and less predictable power system. In order to guarantee security of supply under these conditions, real-time control and online security assessment are of the utmost importance. The main requirement for power system simulators in this context thus becomes the simulation time. The simulator has to be able to reproduce power system phenomena much faster than their real-time duration. An effective way to accelerate computation time of power system stability simulators is based on analog emulation of the power system grid. The idea is to avoid the heavy, time-consuming numerical matrix calculations of the grid by using an instantaneous analog Kirchhoff grid, with which computation becomes intrinsically parallel and the simulation time independent of the power system topology size. An overview of the power system computation history and the evolution of microelectronics highlights that the renaissance of dedicated analog computation is justified. Modern VLSI technologies can overcome the drawbacks which caused the disappearance of analog computation units in the 1960s. This work addresses therefore the development of a power system emulation approach from its theoretical principles to the behavioral design and the microelectronic implementation of a first demonstrator. The approach used in this research is called AC emulation approach and is based on a one-to-one mapping of components of the real power system (generator, load and transmission line) by emulating their behavior on a CMOS microelectronic integrated circuit (ASIC). The signals propagating on the emulated grid are the shrunk and downscaled current and voltage waves of the real power system. The uniqueness of this emulation approach is that frequency dependence of the signals is preserved. Therefore, the range of phenomena that can be emulated with an AC emulator depends only on the implemented models. Within the framework of this thesis, we restrict our developments to transient stability analysis, as our main focus is put on emulation speed. v We provide behavioral AC emulation models for the three main power system components. Thereby, special attention is paid to the generator model, which is shown to introduce a systematic error. This error is analyzed and reduced by model adaptation. Behavioral simulation results validate the developed models. Moreover, we suggest custom programmable analog building blocks for the implementation of the proposed behavioral models. During their design, application specific requirements, as well as imperfections, calibration, mismatch and process-variation aspects, are taken into account. In particular, the design of the tunable floating inductance used in all three AC emulation models is discussed in detail. In fact, major design challenges have to be addressed in order to achieve an inductance suitable for our application. Finally, a first AC emulation demonstrator is presented. A benchmark using a fixed two- machine topology has been implemented using a 0.35μm 3.3V CMOS technology. The characteristics of the emulated components (i.e. generators and transmission lines) are reprogrammable, allowing short circuits to be emulated at different distances from the generator. The emulated phenomena are shown to be 10′000 times faster than real time, therefore proving the high-speed capabilities of AC emulation.