Publication

Batch fabrication of gold-gold nanogaps by E-beam lithography and electrochemical deposition

Abstract

We report on the successful development of a well-controlled two-step batch nano-fabrication process to achieve nanometer-size gaps at the wafer scale. The technique is based on an optimized electron-beam lithography process, which enables the fabrication of nanogaps in the range (15 +/- 4) nm. Following this first step, the feedback-controlled electrochemical deposition of gold from an aqueous HAuCl4-based electrolyte is applied to further reduce the size of the gap down to about 0.3-1.0 nm. This protocol was successfully demonstrated by fabricating more than 385 nanogaps on a 4 inch wafer. The reproducible fabrication of nanogaps in the range between 0.3 and 1.0 nm opens up new perspectives for addressing the electrical and reactivity properties of single molecules and clusters in confined space under well-controlled conditions.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (18)
Extreme ultraviolet lithography
Extreme ultraviolet lithography (also known as EUV or EUVL) is an optical lithography technology used in semiconductor device fabrication to make integrated circuits (ICs). It uses extreme ultraviolet (EUV) wavelengths near 13.5 nm, using a laser-pulsed tin (Sn) droplet plasma (Sn ions in the ionic states from Sn IX to Sn XIV give photon emission spectral peaks around 13.5 nm from 4p64dn - 4p54dn+1 + 4dn-14f ionic state transitions.), to produce a pattern by using a reflective photomask to expose a substrate covered by photoresist.
Semiconductor device fabrication
Semiconductor device fabrication is the process used to manufacture semiconductor devices, typically integrated circuits (ICs) such as computer processors, microcontrollers, and memory chips (such as NAND flash and DRAM) that are present in everyday electrical and electronic devices. It is a multiple-step photolithographic and physio-chemical process (with steps such as thermal oxidation, thin-film deposition, ion-implantation, etching) during which electronic circuits are gradually created on a wafer, typically made of pure single-crystal semiconducting material.
Nanoimprint lithography
Nanoimprint lithography (NIL) is a method of fabricating nanometer scale patterns. It is a simple nanolithography process with low cost, high throughput and high resolution. It creates patterns by mechanical deformation of imprint resist and subsequent processes. The imprint resist is typically a monomer or polymer formulation that is cured by heat or UV light during the imprinting. Adhesion between the resist and the template is controlled to allow proper release.
Show more
Related publications (34)

Fabrication and applications of AuAg alloy metasurfaces and hybrid metal dielectric nanoantennas

Debdatta Ray

The most prevalent materials used in the field of plasmonics are Au and Ag. However, for the past few years, the plasmonic community has also been looking for alternative materials that have lower losses than Au and higher stability than Ag. This thesis is ...
EPFL2021

Spontaneous formation of ordered micro-wrinkles on a thermosensitive resist

Jürgen Brugger, Giovanni Boero, Xia Liu, Ana Conde Rubio, Mohammadreza Rostami

Self-organizing patterns with micrometer-scale features are promising for applications in photonics and bioengineering. Their spontaneous formation reduces the number of required processing steps. Here, we report an approach to spontaneously form stochasti ...
2021

Mesoscopic magnetic systems: From fundamental properties to devices

Dirk Grundler

Research into mesoscopic magnetic systems, which incorporate magnetic elements with dimensions ranging from a few nm up to a few 10s of micrometer, has been spurred on by the developments in their fabrication, characterisation, and control. Electron beam a ...
2021
Show more
Related MOOCs (3)
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Microstructure Fabrication Technologies I
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.
Micro and Nanofabrication (MEMS)
Learn the fundamentals of microfabrication and nanofabrication by using the most effective techniques in a cleanroom environment.

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.