Publication

Fabrication and curing conditions effects on the fatigue behavior of a structural adhesive

Anastasios Vassilopoulos, José Manuel de Sena Cruz
2020
Journal paper

Abstract

This paper investigates the effects of degassing, curing and post-curing conditions on the tensile quasi-static and fatigue behavior of a cold-curing structural epoxy adhesive. Quasi-static experiments performed at standardized and high displacement rates similar to those imposed to the material under fatigue loading, in order to derive comparable results from both loadings, and tensile-tensile fatigue tests at a fixed stress ratio, were carried out. Digital image correlation, video extensometer, thermal camera, digital camera and microscope were used to record the evolution of the strain and temperature, and assess the damage evolution during and after loading. The results shown that degassing can improve the material behavior when curing at ambient temperatures, since it assists the removal of several small voids from the bulk adhesive. However, when curing the material at high temperatures, immediately after mixing, the degassing does not offer any advantage, and the material's long-term performance decreases.

Official source

https://infoscience.epfl.ch/record/279121?ln=en

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Ontological neighbourhood

Chemical engineering

Materials science: Deformation of materials

Related concepts (31)

Fatigue (material)

In materials science, fatigue is the initiation and propagation of cracks in a material due to cyclic loading. Once a fatigue crack has initiated, it grows a small amount with each loading cycle, typically producing striations on some parts of the fracture surface. The crack will continue to grow until it reaches a critical size, which occurs when the stress intensity factor of the crack exceeds the fracture toughness of the material, producing rapid propagation and typically complete fracture of the structure.

Stress–strain analysis

Stress–strain analysis (or stress analysis) is an engineering discipline that uses many methods to determine the stresses and strains in materials and structures subjected to forces. In continuum mechanics, stress is a physical quantity that expresses the internal forces that neighboring particles of a continuous material exert on each other, while strain is the measure of the deformation of the material. In simple terms we can define stress as the force of resistance per unit area, offered by a body against deformation.

Materials science

Materials science is an interdisciplinary field of researching and discovering materials. Materials engineering is an engineering field of finding uses for materials in other fields and industries. The intellectual origins of materials science stem from the Age of Enlightenment, when researchers began to use analytical thinking from chemistry, physics, and engineering to understand ancient, phenomenological observations in metallurgy and mineralogy. Materials science still incorporates elements of physics, chemistry, and engineering.

Related publications (32)

Influence of model uncertainty and long term deformations in action effects calculation in reinforced concrete structures

Xhemsi Malja

Most codes of practice adopt a semi probabilistic design approach for the dimensioning and assessment of structures. Accordingly, structural safety is ensured by performing limit state verifications using design values determined with adequately calibrated ...

EPFL2024

Local relaxation of residual stress in high-strength steel welded joints treated by HFMI

Alain Nussbaumer, Yuki Ono, Heikki Tapani Remes

This research studies the influence of high-peak loads on local relaxation of residual stress and fatigue damage in highstrength steel welded joints treated by high-frequency mechanical impact (HFMI) treatment. The joint behavior is simulated with elastic– ...

2024

A novel fatigue life prediction methodology based on energy dissipation in viscoelastic materials, synergistic effects of stress level, stress ratio, and temperature

Thomas Keller, Lulu Liu, Abdolvahid Movahedirad

This work introduces a new methodology to predict the fatigue life of viscoelastic materials by considering the creep effect on fatigue behavior under the concurrent effects of stress level, stress ratio, and temperature. The model established based on the ...

2024

Related MOOCs (7)

The Art of Structures I - Cables and arcs

Ce cours présente les principes du fonctionnement, du dimensionnement et de la conception des structures. L'approche est basée sur une utilisation de la statique graphique et traite en particulier des

Cement Chemistry and Sustainable Cementitious Materials

Learn the basics of cement chemistry and laboratory best practices for assessment of its key properties.

The Art of Structures I - Cables and arcs

L'art des structures propose une découverte du fonctionnement des structures porteuses, telles que les bâtiments, les toitures ou les ponts. Ce cours présente les principes du dimensionnement et les s

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.