Publication

Multiphase transport and evaporative cooling in fuel cell gas diffusion layers

Sarah van Rooij
2021
EPFL thesis
Abstract

The use of evaporative cooling in the gas diffusion layer (GDL) of polymer electrolyte fuel cells has been proposed as a simple yet impactful solution to simultaneously provide the functionality of cell cooling, thanks to the dissipation of the latent heat of the fluid, and of humidification of gases via water vaporization. However, the underlying multiphase heat and mass transport processes in the GDL porous matrix are still elusive, which affects the cooling performance of the process and leads to a lack of reliable design tools for the structure and morphology of the GDL. In this thesis, I performed pore-level analyses of heat and mass transport in GDLs upon development of novel modeling tools, according to three sequential steps: (i) effective heat conduction through a real GDL geometry; (ii) heat and mass transport through an artificial lattice with a static liquid-gas interface; (iii) mass transport of water adopting an interface-resolving method.First, pore-level thermal conduction simulations of commercial GDLs were conducted, utilizing the exact GDL structures obtained by X-ray tomography. Correlations for effective thermal conductivity were extracted as a function of saturation. An energy sink term, accounting for the evaporative cooling, was added, providing a quantification of the conductive heat transfer in GDLs with evaporative cooling. The compression of the GDL and the water distribution in the GDLs was found to be a key factor for thermal conduction and evaporative cooling ability. Second, the heat conduction model was augmented by enabling convective transport within the gaseous phases, mass transfer, and local evaporation at the water-gas interface. The GDL structure was replaced by an artificial lattice. A three-dimensional model was developed, solving the Navier-Stokes equations, species transport and energy conservation equations in the gas domain, and heat conduction in the solid fibers and water phase. Evaporation at the liquid-gas interface was modeled using kinetic gas theory. It was demonstrated that porosity and fiber size had a small effect on evaporative cooling. On the other hand, operating conditions such as carrier gas velocity and type led to large changes in the evaporation rates as they increased the removal of vapor through convection and diffusion, hence increasing the evaporation rate and cooling effect. Larger operating temperatures led to larger saturation pressures, thus driving an increase of the evaporation rate. The artificial lattice structure was then modified to investigate a novel mixed hydrophilic/hydrophobic coated GDL. The mixed coating allows for separating liquid and gas transport paths in the anode. The results indicated that patterned GDLs provide increased evaporation capabilities compared to traditional, non-patterned GDLs, as the water-gas interface is nearer the gas channel, leading to removal of evaporated vapor and enhanced evaporative cooling. Third, X-ray tomography was used to reproduce an artificial lattice, and the water distribution and meniscus shape were predicted using a Volume Of Fluid approach, comparing the obtained interface from different initial water distributions, representing different water injection processes into the patterned wettability GDL.This thesis showed the impact of water distribution on conductive heat transport, and the importance of removal of water vapor at the water-gas interface to enhance evaporative cooling.

About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (32)
Evaporative cooler
An evaporative cooler (also known as evaporative air conditioner, swamp cooler, swamp box, desert cooler and wet air cooler) is a device that cools air through the evaporation of water. Evaporative cooling differs from other air conditioning systems, which use vapor-compression or absorption refrigeration cycles. Evaporative cooling exploits the fact that water will absorb a relatively large amount of heat in order to evaporate (that is, it has a large enthalpy of vaporization).
Cooling tower
A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream, to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators.
Evaporator
An evaporator is a device used to turn a liquid into a gas. Some air conditioners and refrigerators use compressed liquids with a low boiling point that vaporizes within the system to cool it, whilst emitting the thermal energy into its surroundings. Evaporators are often used to concentrate a solution. One example is the climbing/falling film plate evaporator, which is used to make condensed milk. Similarly, reduction (cooking) is a process of evaporating liquids from a solution to produce a "reduced" food product, such as wine reduction.
Show more
Related publications (291)

Design and assessment of an evaporating water-cooled methanation reactor for a SOE-based power-to-methane system

Philippe Aubin

The transition towards clean renewable energy sources, where wind and solar are prone to variation, requires adequate energy storage. Power-to-methane (PtM) systems can be part of the solution. Specifically, solid-oxide-electrolyser (SOE) based PtM systems ...
EPFL2024

Thermal conductivity of Li 3 PS 4 solid electrolytes with ab initio accuracy

Michele Ceriotti, Federico Grasselli

The vast amount of computational studies on electrical conduction in solid-state electrolytes is not mirrored by comparable efforts addressing thermal conduction, which has been scarcely investigated despite its relevance to thermal management and (over)he ...
Amer Physical Soc2024

Unearthing the foundational role of anharmonicity in heat transport in glasses

The time-honored Allen -Feldman theory of heat transport in glasses is generally assumed to predict a finite value for the thermal conductivity, even if it neglects the anharmonic broadening of vibrational normal modes. We demonstrate that the harmonic app ...
Amer Physical Soc2024
Show more
Related MOOCs (13)
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
SES Swiss-Energyscope
La transition énergique suisse / Energiewende in der Schweiz
Thermodynamics
Ce cours complète le MOOC « Thermodynamique : fondements » qui vous permettra de mettre en application les concepts fondamentaux de la thermodynamique. Pour atteindre cet objectif, le Professeur J.-P
Show more

Graph Chatbot

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.