Road surface marking is any kind of device or material that is used on a road surface in order to convey official information; they are commonly placed with road marking machines (also referred to as road marking equipment or pavement marking equipment). They can also be applied in other facilities used by vehicles to mark parking spaces or designate areas for other uses. In some countries and areas (France, Italy, Czech Republic, Slovakia etc.), road markings are conceived as horizontal traffic signs, as opposed to vertical traffic signs placed on posts.
Road surface markings are used on paved roadways to provide guidance and information to drivers and pedestrians. Uniformity of the markings is an important factor in minimizing confusion and uncertainty about their meaning, and efforts exist to standardize such markings across borders. However, countries and areas categorize and specify road surface markings in different ways—white lines are called white lines mechanical, non-mechanical, or temporary. They can be used to delineate traffic lanes, inform motorists and pedestrians or serve as noise generators when run across a road, or attempt to wake a sleeping driver when installed in the shoulders of a road. Road surface marking can also indicate regulations for parking and stopping.
There is continuous effort to improve the road marking system, and technological breakthroughs include adding retroreflectivity, increasing longevity, and lowering installation cost.
Today, road markings are used to convey a range of information to the driver spanning navigational, safety and enforcement issues leading to their use in road environment understanding within advanced driver-assistance systems and consideration for future use in autonomous road vehicles.
Mechanical devices may be raised or recessed into the road surface, and either reflective or non-reflective. Most are permanent; some are movable.
Cat's eye, invented by Percy Shaw in the 1930s, Cat's eyes equip many major routes in the British Isles.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Le cours « Infrastructures de transport I » permet de maitriser les principes de la conception des infrastructures de transport routières et ferroviaires. Ce cours décrit les bases du projet et traite
Creating performing infrastructures for transport systems have to consider effects and impacts on environment and safety. Managing transport systems and considering maintenance work impact the choices
Traffic comprises pedestrians, vehicles, ridden or herded animals, trains, and other conveyances that use public ways (roads) for travel and transportation. Traffic laws govern and regulate traffic, while rules of the road include traffic laws and informal rules that may have developed over time to facilitate the orderly and timely flow of traffic. Organized traffic generally has well-established priorities, lanes, right-of-way, and traffic control at intersections.
A retroreflector (sometimes called a retroflector or cataphote) is a device or surface that reflects radiation (usually light) back to its source with minimum scattering. This works at a wide range of angle of incidence, unlike a planar mirror, which does this only if the mirror is exactly perpendicular to the wave front, having a zero angle of incidence. Being directed, the retroflector's reflection is brighter than that of a diffuse reflector. Corner reflectors and cat's eye reflectors are the most used kinds.
A road surface (English), or pavement (American), is the durable surface material laid down on an area intended to sustain vehicular or foot traffic, such as a road or walkway. In the past, gravel road surfaces, macadam, hoggin, cobblestone and granite setts were extensively used, but these have mostly been replaced by asphalt or concrete laid on a compacted base course. Asphalt mixtures have been used in pavement construction since the beginning of the 20th century and are of two types: metalled (hard-surfaced) and unmetalled roads.
, , ,
Tire and road wear particles (TRWP) contain complex mixtures of chemicals and release them to the environment,and potential toxic effects of these chemicals still need to be characterized. We used a standardized surrogate for TRWP,cryogenically milled tire ...
2024
, ,
Path-following control is a critical technology for autonomous vehicles. However, time-varying parameters, parametric uncertainties, external disturbances, and complicated environments significantly challenge autonomous driving. We propose an iterative rob ...
In smart cities, ensuring road safety and optimizing transportation efficiency heavily relies on streamlined road condition monitoring. The application of Artificial Intelligence (AI) has notably enhanced the capability to detect road surfaces effectively. ...