Valence and conduction bands | EPFL Graph Search

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

In solid-state physics, the valence band and conduction band are the bands closest to the Fermi level, and thus determine the electrical conductivity of the solid. In nonmetals, the valence band is the highest range of electron energies in which electrons are normally present at absolute zero temperature, while the conduction band is the lowest range of vacant electronic states. On a graph of the electronic band structure of a semiconducting material, the valence band is located below the Fermi level, while the conduction band is located above it. The distinction between the valence and conduction bands is meaningless in metals, because conduction occurs in one or more partially filled bands that take on the properties of both the valence and conduction bands. Band gap In semiconductors and insulators the two bands are separated by a band gap, while in conductors the bands overlap. A band gap is an energy range in a solid where no electron states can exist due to the quantization of energy. Within the concept of bands, the energy gap between the valence band and the conduction band is the band gap. Electrical conductivity of non-metals is determined by the susceptibility of electrons to be excited from the valence band to the conduction band. Semiconductor band structureSee electrical conduction and semiconductor for a more detailed description of band structure. In solids, the ability of electrons to act as charge carriers depends on the availability of vacant electronic states. This allows the electrons to increase their energy (i.e., accelerate) when an electric field is applied. Similarly, holes (empty states) in the almost filled valence band also allow for conductivity. As such, the electrical conductivity of a solid depends on its capability to flow electrons from the valence to the conduction band. Hence, in the case of a semimetal with an overlap region, the electrical conductivity is high. If there is a small band gap (Eg), then the flow of electrons from valence to conduction band is possible only if an external energy (thermal, etc.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (6)

Related people (23)

Related units (9)

Related concepts (27)

Related courses (37)

Related lectures (287)

Related MOOCs (4)

From hidden order to antiferromagnetism: Electronic structure changes in Fe-doped URu2Si2

Emmanouil Frantzeskakis, Ji Dai, Kevin Huang

In matter, any spontaneous symmetry breaking induces a phase transition characterized by an order parameter, such as the magnetization vector in ferromagnets, or a macroscopic many electron wave function in superconductors. Phase transitions with unknown order parameter are rare but extremely appealing, as they may lead to novel physics. An emblematic and still unsolved example is the transition of the heavy fermion compound URu2Si2 (URS) into the so-called hidden-order (HO) phase when the temperature drops below T-0 = 17.5 K. Here, we show that the interaction between the heavy fermion and the conduction band states near the Fermi level has a key role in the emergence of the HO phase. Using angle-resolved photoemission spectroscopy, we find that while the Fermi surfaces of the HO and of a neighboring antiferromagnetic (AFM) phase of well-defined order parameter have the same topography, they differ in the size of some, but not all, of their electron pockets. Such a nonrigid change of the electronic structure indicates that a change in the interaction strength between states near the Fermi level is a crucial ingredient for the HO to AFM phase transition.

NATL ACAD SCIENCES2021

Charge-carrier Dynamics in Metal Oxides and Hybrid Lead Perovskites investigated by Time-Resolved UV and X-ray Spectroscopy

Thomas Charles Henry Rossi

In modern ultrafast optoelectronic technologies based on wide band gap insulators, the non-equilibrium dynamics of photogenerated charges plays a major role. Unravelling the mechanisms of interaction between these charge carriers and their environment is crucial to support the design of more efficient devices. Especially, the absorption of photons with more energy than the optical band gap generates electrons-hole pairs (EHP) whose transport and dissociation as excitons or free charge carriers is of pivotal importance for the charge separa- tion at photovoltaic interfaces. The advent of ultrafast pump-probe optical spectroscopy in the deep-UV provides access to the dynamics of EHP through a variety of transient modifications of the optical spectrum. In this Thesis, the cooling of electrons in ZnO and methylammonium lead bromide perovskite (MAPbBr3), two broadly used direct band gap semiconductors, is tracked as they end up and accumulate at the bottom of the conduction band. ZnO has a fast cooling time of the order of 100 fs which efficiently converts photon excess energy into lattice heat while MAPbBr3 has a rather slow electron cooling time of the order of 400 fs, favorable for charge separation at interfaces as it drives the injection of hot carriers. Additionally, the high energy carried by the UV probe photons provides access to the photodynamics at different high symmetry points in the Brillouin zone. In a second step, these two semiconductors have been associated to other materials to form prototypical photovoltaic assemblies such as dye-sensitized (ZnO/N719) and solid-state lead perovskite sensitized (TiO2/MAPbBr3) interfaces. Upon electron injection into the transition metal oxide (ZnO or TiO2), dramatic changes are observed in the absorption close to the optical band gap from which the timescale of electron injection is obtained. It highlights how slight screening length and chemical potential changes can generate large modifications in the optical properties through many-body effects. At both interfaces, a delayed appearance of the electron at the bottom of the conduction band is observed which is due the formation of a bound state. This Thesis extends beyond the band insulators to the photodynamics of NiO, a strongly correlated charge-transfer insulator. Excitation above the optical band gap generates a large photoinduced absorption below the optical band gap which is characteristic of the interplay between electronic and low energy bosonic excitations. The dressing of electronic excitations with bosonic modes generates low energy excitation modes on ultrafast timescales which generate a competition between itinerant and localized resonances with a high degree of tunability. The progress made in resonant X-ray based time-resolved spectroscopies allows the investigation of the degree of charge localization around specific atoms in a system. Photogenerated electron localization in NiO is studied by time-resolved X-ray absorption spectroscopy, causing bond elongations and the formation of an electron-polaron in less than 100 ps. In a last part, the linear dichroism of the steady-state X-ray absorption spectrum of anatase TiO2 at the K-edge is studied which provides an unambiguous assignment of the pre-edge transitions as their orbital composition is strongly anisotropic and sensitive to the crystal orientation.

EPFL2018

Oxygen DX center in In0.17Al0.83N: Nonradiative recombination and persistent photoconductivity

Alfredo Pasquarello, Giacomo Francesco Leonardo Miceli, Rocco Meli

Using a hybrid density-functional scheme, we address the O impurity substitutional to N (O-N) in In0.17Al0.83N. Our modelling supports In clustering to account for the strong band-gap bowing observed in InxAl1-xN alloys. To study the ON defect in In0.17Al0.83N alloys, we therefore consider a model containing an In cluster and find that the most stable configuration shows four In nearest neighbors. We show that such a ON defect forms a DX center and gives rise to two defect levels at 0.70 and 0.41 eV below the conduction band edge, in good agreement with experiment. The calculated defect energetics entail a fast nonradiative recombination upon photoexcitation at room temperature and account for the observation of persistent photoconductivity at low temperature. Published by AIP Publishing.

American Institute of Physics2017

EE-567: Semiconductor devices II

Students will learn about understanding the fundamentals and applications of emerging nanoscale devices, materials and concepts. Remark: at least 5 students should be enrolled for the course to be g

PHYS-310: Solid state physics II

Ce cours de deux semestres donne une introduction à la Physique du solide, à la structure cristalline, aux vibrations du réseau, aux propriétés électroniques, de transport thermique et électrique ains

MSE-484: Properties of semiconductors and related nanostructures

This course explains the origin of optical and electrical properties of semiconductors. The course elaborates how they change when the semiconductors are reduced to sizes of few nanometers. The course

Electronics

Introduction à l’électronique analogique- seconde partie. Fonctions linéaires de base réalisée à l’aide de transistor bipolaire.

Electronics

Introduction à l’électronique analogique- seconde partie. Fonctions linéaires de base réalisée à l’aide de transistor bipolaire.

Synchrotrons and X-Ray Free Electron Lasers (part 1)

Electronic band structure

In solid-state physics, the electronic band structure (or simply band structure) of a solid describes the range of energy levels that electrons may have within it, as well as the ranges of energy that they may not have (called band gaps or forbidden bands). Band theory derives these bands and band gaps by examining the allowed quantum mechanical wave functions for an electron in a large, periodic lattice of atoms or molecules.

Valence and conduction bands

Electron hole

In physics, chemistry, and electronic engineering, an electron hole (often simply called a hole) is a quasiparticle denoting the lack of an electron at a position where one could exist in an atom or atomic lattice. Since in a normal atom or crystal lattice the negative charge of the electrons is balanced by the positive charge of the atomic nuclei, the absence of an electron leaves a net positive charge at the hole's location. Holes in a metal or semiconductor crystal lattice can move through the lattice as electrons can, and act similarly to positively-charged particles.

Optical Materials Properties MICRO-330: Sensors

Delves into the properties of materials affecting photon absorption and electron excitation, crucial for optimizing photon detection efficiency.

Density of States: Introduction MSE-484: Properties of semiconductors and related nanostructures

Introduces the concept of density of states and its impact on light absorption in materials.

Free Electrons and Holes (Electronics)MSE-210: Functional properties of materials

Explores the manipulation of charge carriers in semiconductors to generate electric fields.