Home

Input-Output

Applied sciences
Computer engineering
Computer architecture
Input-Output

About
Privacy
Disclaimer

Graph Chatbot

Related publications (29)

3D Printing of Customizable Transient Bioelectronics and Sensors

Transient electronics have emerged as a new category of devices that can degrade after their functional lifetime, offering tremendous potential as disposable sensors, actuators, wearables, and implants. Additive manufacturing methods represent a promising ...

2024

A method and system for optimizing design, implantation, and stimulation protocols of electrodes stimulating the nervous system

Silvestro Micera, Simone Romeni

A method for optimizing at least one of a geometry, an implantation procedure, and/or stimulation protocol of one or more electrodes for an electrical stimulation of a target structure in a nervous system of a living being by a computer device, the method ...

2024

Printed degradable piezoelectric microsystems: From ink formulation to device fabrication and characterization

Morgan Mc Kay Monroe

As the world moves further and further into the semiconductor era, the amount of waste generated from electronics ("e-waste") is increasing rapidly and unsustainably. Of particular note, alternatives to lead-based piezoelectric materials must be establishe ...

EPFL2023

Electrode Impact on the Electrical Breakdown of Dielectric Elastomer Thin Films

Herbert Shea, Fabio Beco Albuquerque

Dielectric Elastomer Actuators (DEAs) enable the realization of energy-efficient and compact actuator systems. DEAs operate at the kilovolt range with typically microampere-level currents and hence minimize thermal losses in comparison to low voltage/high ...

MDPI2023

Print-Light-Synthesis of Gold Thin Film Electrodes for Electrochemical Sensing

Horst Pick, Andreas Stephan Lesch, Emanuela Maiorano

The one-step fabrication of gold films by inkjet printing of a gold precursor ink and its photochemical reduction by exposure to UV light is presented. Inkjet printing creates on a substrate with high control micrometer-thin reaction volumes in which upon ...

Wiley2023

PopTouch: A Submillimeter Thick Dynamically Reconfigured Haptic Interface with Pressable Buttons

Herbert Shea, Ayana Mizutani, Amir Firouzeh

The interactions with touchscreens rely heavily on vision: The virtual buttons and virtual sliders on a touchscreen provide no mechanical sense of the object they seek to represent. This work presents PopTouch: a 500 mu m thick flexible haptic display that ...

Wiley-V C H Verlag Gmbh2023

A Sprayable Electrically Conductive Edible Coating for Piezoresistive Strain Sensing

Dario Floreano, Bokeon Kwak, Pietro Rossi

Edible electronics leverages the electronic properties of food-derived materials to deliver safer technologies that can be degraded (or digested) in the environment (or body) at the end-of-life. Sensors will be central to future smart edible robots, and ed ...

2024

Federated Linear Bandit Learning via Over-the-air Computation

Yuning Jiang, Xin Liu, Ting Wang

In this paper, we investigate federated contextual linear bandit learning within a wireless system that comprises a server and multiple devices. Each device interacts with the environment, selects an action based on the received reward, and sends model upd ...

IEEE2023

Evaluation of inkjet-printed spinel coatings on standard and surface nitrided ferritic stainless steels for interconnect application in solid oxide fuel cell devices

Manuel Bianco

Inkjet printing technology was employed for the application of protective layer coatings in SOFC metallic interconnects. Aqueous-based spinel coatings were inkjet-printed on standard and surface nitrided K41 ferritic stainless-steel substrates. Inkjet-prin ...

ELSEVIER SCI LTD2022

3D printing of elastomeric mechanical sensors designed for human motion monitoring

Ryan Mitchell van Dommelen

In this thesis several advances are made to the emerging field of 3D printed mechanical sensors. Techniques and processes were developed to enable the integration of highly conductive, and capacitive and piezoresistive sensing features embedded within 3D p ...

EPFL2022

Page 1 of 3