Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
The filler effect, due to the physical presence of mineral additions in cement, is mainly known to accelerate the hydration of the clinker component. Previously, this was attributed to the surface of the filler providing nucleation sites for C-S-H as there ...
Wiley-Blackwell2014
, ,
The hydromechanical response of a Wyoming-type bentonite (MX-80) and its interface with steel was studied in terms of shear resistance under different hydration levels. A series of shear tests under constant normal stress were performed in total suction co ...
A new mesoscopic model able to describe percolation of globular-equiaxed grains, highly relevant for hot tearing formation in castings, has been developed. This model is inspired from the granular model of Sistaninia et al. [1-5] that considers polyhedral ...
Rheology of powder suspensions is a key factor in many processing routes, and better understanding of the parameters that control the rheology improves technical progress by reducing the empirical factors in the formulation of powder slurries. The strict r ...
At the turn of the 19th century, the production and use of concrete were limited by the unavailability of raw materials to produce good cement in several places. From that time onwards, the progress of chemistry and a number of empirical discoveries opened ...
Controlled low-strength material (CLSM) mixture design remains a trial-and-error process. A new approach using relative proportioning of the constituent materials instead of prescribed mass contents is proposed. Relative proportions allow for independent a ...
Pickering emulsions stabilized with a natural silicate mineral, halloysite, were dried by freeze granulation in order to prepare porous granules. Different formulations were studied, by varying the pH of the suspension, the ionic strength and with the addi ...
Compacted MX-80 bentonite is a potential backfill material in radioactive-waste repositories. Pore space in MX-80 has been the subject of considerable debate. 3D reconstructions of the pore space based on tomographic methods could provide new insights into ...
A coupled hydromechanical granular model aimed at predicting hot tear formation and stress-strain behavior in metallic alloys during solidification is applied to the semicontinuous direct chill casting of aluminum alloy round billets. This granular model c ...
The lack of reliable methods for evaluation of soil abrasivity and revealing the effects of different parameters on wear rate are nowadays considered as a deficiency in geotechnical investigation during feasibility study, design and construction phases of ...