Efficient energy use

Summary

Efficient energy use, sometimes simply called energy efficiency, is the process of reducing the amount of energy required to provide products and services. For example, insulating a building allows it to use less heating and cooling energy to achieve and maintain a thermal comfort. Installing light-emitting diode bulbs, fluorescent lighting, or natural skylight windows reduces the amount of energy required to attain the same level of illumination compared to using traditional incandescent light bulbs. Improvements in energy efficiency are generally achieved by adopting a more efficient technology or production process or by application of commonly accepted methods to reduce energy losses. There are many motivations to improve energy efficiency. Decreasing energy use reduces energy costs and may result in a financial cost saving to consumers if the energy savings offset any additional costs of implementing an energy-efficient technology. Reducing energy use is also seen as a solution t

Official source

https://en.wikipedia.org/wiki/Efficient_energy_use

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (100)

Related publications

Related people (44)

Related people

Related units (14)

Related units

Related concepts (103)

Related concepts

Related courses (46)

Related courses

Related lectures (71)

Related lectures

Related publications (100)

Efficient Planing Tool for WDM Transport Networks

Daniel Rodellar Gomez

Kluwer Academic Publishers2001

Many diseases including sick building syndrome, respiratory problems and cancers can be caused by exposure to high concentrations of toxins commonly used in modern building materials, paints, glues and furniture. To minimize exposure to these toxins, it is important to have air exchange with the outside environment. However, this is usually not energy efficient because the air must be heated or cooled. The purpose of the Intasense project was to resolve this problem by creating an air quality monitor which could determine the current quality of air within the building. This information would then be used to control the ventilation system within an energy efficient building. The purpose of this Ph.D. thesis was both to build a system which could be used to test and calibrate sensors used in the air quality monitor as well as to build its final fluidic platform. During this thesis, three fluidic platforms which include a humidity buffering system were designed, tested and constructed. The first platform was used to test an electrochemical sensor or metal oxide sensor in the laboratory. The second and third platforms held three electrochemical or metal oxide sensors, respectively. They are able to deliver equal quantities of gas to the sensors simultaneously. To date, the multisensor metal oxide platform has been used to create two versions of the Intasense Demonstrator and used to calibrate novel and commercial gas sensors. In both of these applications simultaneous delivery of equal quantities of the sample gas are required for optimal gas sensor signal processing: equal quantities are required so that the amount of analyte in contact with each sensor is the same and simultaneous delivery allows all three sensors to respond concurrently. This was achieved by creating a computational model of gas flow through the system, conducting a parameter sweep and then selecting the optimal set. To confirm that the model and machine error were not significant, a Latin square design was used to test the platform. This test showed that gas delivery to each channel was equal within statistical boundaries. Another major challenge was buffering humidity fluctuations without loss of analyte gas. This was necessary because metal oxide gas sensors are also sensitive to humidity fluctuations. To prevent a false positive caused by a rapid humidity increase, a reversible adsorbent was placed upstream of the gas sensors. However, there was concern that the adsorbent may remove analyte gasses. To optimize the tradeoff between humidity buffering and loss or delay of analyte signal, a computational model of adsorption and desorption of gasses within the filtration system was developed. It was experimentally tested using benzene, carbon monoxide, formaldehyde and nitrogen dioxide. To date ten platforms have been delivered to laboratories throughout Europe. Three are being used to test and calibrate gas sensors. The rest have been used to create demonstrators of the Intasense Air Quality Monitor.

EPFL2016

A building specific, economic building stock model to evaluate energy efficiency and renewable energy

Claudio Nägeli

LESO-PB, EPFL2015

EPFL2016