Publications related to Mohr's circle

Load-strengthening versus load-weakening faulting in gouge-bearing faults: insights from triaxial saw-cut experiments

Marie Estelle Solange Violay, Carolina Giorgetti, Iskander Louhichi

Brittle reactivation of pre-existing faults is theoretically constrained by their friction, the stress field orientation, and magnitude. Thus, following the Mohr-Coulomb failure criterion, the increase in tectonic shear stress leads to the reactivation of ...

2019

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Yves Weinand, Aryan Rezaei Rad, Henry V. Burton

Spurred by developments in digital fabrication, there has been an increase in the application of the Integral Mechanical Attachment (IMA) technique in timber plate structures. Despite its increase in popularity, there have been very few systematic investig ...

ELSEVIER SCI LTD2019

Reservoir stimulation’s effect on depletion-induced seismicity

Lyesse Laloui, Barnaby Padraig Fryer, Gunter Siddiqi

Depletion-induced seismicity can pose a problem in some fluid-producing subsurface reservoirs, in some cases requiring production rate control in order to limit the seismicity. This study investigates the use of reservoir stimulation to reduce the depletio ...

2018

The role of the stress regime on microseismicity induced by overpressure and cooling in geologic carbon storage

Victor Vilarrasa Riano

Fluid injection in deep geological formations usually induces microseismicity. In particular, industrial-scale injection of CO2 may induce a large number of microseismic events. Since CO2 is likely to reach the storage formation at a lower temperature than ...

Wiley-Blackwell2016

Viscosity fluid influence on stick-slip motions

Marie Estelle Solange Violay, Chiara Cornelio

The Enhanced Geothermal System (EGS) offers a great potential for developing the use of geothermal energy, allowing the creation of hydrothermal reservoirs in deep and hot geological formations, where energy production was impossible due to a lack of fluid ...

2016

Paul-Mohr-Coulomb failure surface of rock in the brittle regime

Roman Makhnenko

The Paul-Mohr-Coulomb failure criterion includes the intermediate principal stress sigma(II) and friction angles at the limiting stress states of sigma(II)= sigma(III) and sigma(II) = sigma(I), where sigma(I) and sigma(III) are major and minor principal st ...

Amer Geophysical Union2015

Force-based higher-order beam element with flexural–shear–torsional interaction in 3D frames. Part I: Theory

João Saraiva Esteves Pacheco de Almeida

An innovative higher-order beam theory, capable of accurately taking into account flexural–shear–torsional interaction, is originally combined with a force-based formulation to derive the corresponding finite element. The selected set of higher-order defor ...

Elsevier2015

Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs

Aurelio Muttoni, Miguel Fernández Ruiz, Marie-Rose Backes

This paper investigates a reliable design approach for reinforced concrete panels subjected to the combined action of in-plane shear and out-of-plane bending moments, which develop in webs of boxgirder bridges and similar structures. Neglecting this intera ...

Proc. of the 10th fib International PhD Symposium in Civil Engineering, Quebec2014

Chat with Graph Search

Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.

DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.

Mohr's circle

Inverse Modelling and Predictive Inference in Continuum Mechanics: a Data-Driven Approach

Load-strengthening versus load-weakening faulting in gouge-bearing faults: insights from triaxial saw-cut experiments

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Reservoir stimulation’s effect on depletion-induced seismicity

Influence of geometrical imperfections and flaws at welds of steel liners on fatigue behavior of pressure tunnels and shafts in anisotropic rock

The role of the stress regime on microseismicity induced by overpressure and cooling in geologic carbon storage

Viscosity fluid influence on stick-slip motions

Paul-Mohr-Coulomb failure surface of rock in the brittle regime

Force-based higher-order beam element with flexural–shear–torsional interaction in 3D frames. Part I: Theory

Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs

Graph Chatbot

Chat with Graph Search

Influence of geometrical imperfections and flaws at welds of steel liners on fatigue behavior of pressure tunnels and shafts in anisotropic rock

Reservoir stimulation’s effect on depletion-induced seismicity

The role of the stress regime on microseismicity induced by overpressure and cooling in geologic carbon storage

Viscosity fluid influence on stick-slip motions

Load-strengthening versus load-weakening faulting in gouge-bearing faults: insights from triaxial saw-cut experiments

Force-based higher-order beam element with flexural–shear–torsional interaction in 3D frames. Part I: Theory

Experimental push-out investigation on the in-plane force-deformation behavior of integrally-attached timber Through-Tenon joints

Interaction between in-plane shear forces and transverse bending moments in concrete bridge webs

Paul-Mohr-Coulomb failure surface of rock in the brittle regime