Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Superconductors for the ITER Poloidal Field Coils are large cable-in-conduit conductors (CICC) made of NbTi strands encased in a round-in-square stainless steel jacket. Three prototype conductor sections for poloidal field coils PF1/6, PF2/3/4 and PF5 have ...
The power system has been used for communication purposes for many decades, although it was mainly the power utility companies that used low bit rates for control and monitoring purposes. In the last ten years, however, the deregulation of the power and te ...
Cabled conductors based on Nb3Sn technology with operating current in the range of 20 kA and above are mainly restricted to fusion magnets and high field facilities. The experience of last decade has dramatically shown that, opposite to the NbTi conductors ...
Two short length samples have been prepared and tested in SULTAN to benchmark the performance of high current density, advanced Nb3Sn strands in the large cable-in-conduit conductors (CICC) for ITER. The cable pattern and jacket layout were identical to th ...
Current reconstruction in cable-in-conduit conductors (CICC) cables is a crucial issue to determine cables performance in working conditions, and must be performed using inverse problem approaches as direct measurement is not feasible. The current distribu ...
One of the design features which yet offers interesting margins for performance optimization of cable-in-conduit conductors (CICCs), is their geometry. For relatively small size Nb3Sn CICCs, operating at high electromagnetic pressure, such as those for the ...
Methods have been developed to study the distribution of the transport current among the strand bundles of cable-in-conduit conductors (CICC) by using self-field measurements with Hall probe arrays. The unbalance in the transport current is mainly caused b ...
The ITER Toroidal Field (TF) conductor qualification phase has been carried out by testing short sample prototype conductors in the SULTAN test facility. This phase, started in 2007, has been substantially completed after minor adjustment of the conductor ...
AC loss curves measured for the same conductors at SULTAN (CRPP) and at University of Twente (UT) in higher and respectively lower frequency range are compared to draw consistent results. From the unified curves, the coupling time constant (n tau) to be us ...
An evolution of the contact resistances (R-c) of two full-size ITER (International Thermonuclear Experimental Reactor) cable-in-conduit conductors (CICC) aimed for the Poloidal Field Conductor Insert (PFCI) was studied in the Twente Cryogenic Press. The co ...