The Kruithof curve describes a region of illuminance levels and color temperatures that are often viewed as comfortable or pleasing to an observer. The curve was constructed from psychophysical data collected by Dutch physicist Arie Andries Kruithof, though the original experimental data is not present on the curve itself. Lighting conditions within the bounded region were empirically assessed as being pleasing or natural, whereas conditions outside the region were considered uncomfortable, displeasing or unnatural. sources that are considered natural or closely resemble Planckian black bodies, but its value in describing human preference has been consistently questioned by further studies on interior lighting.
For example, natural daylight has a color temperature of 6500 K and an illuminance of about 104 to 105 lux. This color temperature–illuminance pair results in natural color rendition, but if viewed at a low illuminance, would appear bluish. At typical indoor office illuminance levels of about 400 lux, pleasing color temperatures are lower (between 3000 and 6000 K), and at typical home illuminance levels of about 75 lux, pleasing color temperatures are even lower (between 2400 and 2700 K). These color temperature-illuminance pairs are often achieved with fluorescent and incandescent sources, respectively. The pleasing region of the curve contains color temperatures and illuminance levels comparable to naturally lit environments.
At the emergence of fluorescent lighting in 1941, Kruithof conducted psychophysical experiments to provide a technical guide to design artificial lighting. Using gas-discharge fluorescent lamps, Kruithof was able to manipulate the color of emitted light and ask observers to report as to whether or not the source was pleasing to them. The sketch of his curve as presented consists of three major regions: the middle region, which corresponds to light sources considered pleasing; the lower region, which corresponds to colors that are considered cold and dim; and the upper region, which corresponds to colors that are warm and unnaturally colorful.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Lighting or illumination is the deliberate use of light to achieve practical or aesthetic effects. Lighting includes the use of both artificial light sources like lamps and light fixtures, as well as natural illumination by capturing daylight. Daylighting (using windows, skylights, or light shelves) is sometimes used as the main source of light during daytime in buildings. This can save energy in place of using artificial lighting, which represents a major component of energy consumption in buildings.
, , , ,
Health requirements for lighting in buildings are becoming increasingly important in building standards. Yet, there is a lack of concrete data on the lighting conditions that prevail in our workplaces, in terms of their spectral characteristics, their seas ...
Understanding the factors that influence the human perception of glare is necessary to properly address glare risks in buildings and achieve comfortable visual environments, especially in the workplace. Yet large inter-individual variabilities in glare per ...
Point-of-care remote photoplethysmography (rPPG) devices that utilize low-cost RGB cameras have drawn considerable attention due to their convenience in contactless and non-invasive vital signs monitoring. In rPPG, sufficient lighting conditions are essent ...