Are you an EPFL student looking for a semester project?
Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.
Concept
Agricultural hydrology
Summary
Agricultural hydrology is the study of water balance components intervening in agricultural water management, especially in irrigation and drainage.
The water balance components can be grouped into components corresponding to zones in a vertical cross-section in the soil forming reservoirs with inflow, outflow and storage of water:
the surface reservoir (S)
the root zone or unsaturated (vadose zone) (R) with mainly vertical flows
the aquifer (Q) with mainly horizontal flows
a transition zone (T) in which vertical and horizontal flows are converted
The general water balance reads:
inflow = outflow + change of storage
and it is applicable to each of the reservoirs or a combination thereof.
In the following balances it is assumed that the water table is inside the transition zone.
The incoming water balance components into the surface reservoir (S) are:
Rai – Vertically incoming water to the surface e.g.: precipitation (including snow), rainfall, sprinkler irrigation
Isu – Horizontally incoming surface water. This can consist of natural inundation or surface irrigation
The outgoing water balance components from the surface reservoir (S) are:
Eva – Evaporation from open water on the soil surface (see Penman equation)
Osu – Surface runoff (natural) or surface drainage (artificial)
Inf – Infiltration of water through the soil surface into the root zone
The surface water balance reads:
Rai + Isu = Eva + Inf + Osu + Ws, where Ws is the change of water storage on top of the soil surface
{| class="wikitable"
| bgcolor=#fafad2 | Example of a surface water balance
|-
| bgcolor=#faf0e6 | An example is given of surface runoff according to the Curve number method. The applicable equation is:
Osu = (Rai – Ws)2 / (Pp – Ws + Rm)
where Rm is the maximum retention of the area for which the method is used
Normally one finds that Ws = 0.2 Rm and the value of Rm depends on the soil characteristics. The Curve Number method provides tables for these relations.
The method yields cumulative runoff values.
Official source
About this result
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Related concepts (23)
Well drainage
Well drainage means drainage of agricultural lands by wells. Agricultural land is drained by pumped wells (vertical drainage) to improve the soils by controlling water table levels and soil salinity. Subsurface (groundwater) drainage for water table and soil salinity in agricultural land can be done by horizontal and vertical drainage systems. Horizontal drainage systems are drainage systems using open ditches (trenches) or buried pipe drains. Vertical drainage systems are drainage systems using pumped wells, either open dug wells or tube wells.
Drainage equation
A drainage equation is an equation describing the relation between depth and spacing of parallel subsurface drains, depth of the watertable, depth and hydraulic conductivity of the soils. It is used in drainage design. A well known steady-state drainage equation is the Hooghoudt drain spacing equation. Its original publication is in Dutch. The equation was introduced in the USA by van Schilfgaarde. Hooghoudt's equation can be written as:.
Agricultural hydrology
Agricultural hydrology is the study of water balance components intervening in agricultural water management, especially in irrigation and drainage. The water balance components can be grouped into components corresponding to zones in a vertical cross-section in the soil forming reservoirs with inflow, outflow and storage of water: the surface reservoir (S) the root zone or unsaturated (vadose zone) (R) with mainly vertical flows the aquifer (Q) with mainly horizontal flows a transition zone (T) in which vertical and horizontal flows are converted The general water balance reads: inflow = outflow + change of storage and it is applicable to each of the reservoirs or a combination thereof.
Related courses (8)
ENV-523: Hydrogeophysics
This course aims at providing a solid methodological foundation for understanding the principles and applicabilities of geophysical techniques relevant for addressing hydrogeological and related envir
ENV-524: Hydrological risks and structures
Le cours est une introduction à la théorie des valeurs extrêmes et son utilisation pour la gestion des risques hydrologiques (essentiellement crues). Une ouverture plus large sur la gestion des danger
ENV-549: Irrigation and drainage engineering
The course aims at teaching the fundamentals of both irrigation and drainage techniques with particular attention to the soil water balance and related management, the materials, the construction meth
Related lectures (35)
Water Resources Management: Basic NotionsCIVIL-441: Water ressources management
Provides an in-depth exploration of water resources management, covering economic evaluations, risk assessments, hydrological concepts, and the impact of human activities on water systems.
Hydrology FundamentalsENV-424: Water resources engineering
Introduces hydrology fundamentals, covering soil moisture, rainfall modeling, and reservoir systems.
Hydrological Cycle: Soil Water Balance and InfiltrationENV-222: Soil sciences
Explores soil water balance, infiltration processes, and rain intensities.