Centrino is a brand name of Intel Corporation which represents its Wi-Fi and WiMAX wireless computer networking adapters. Previously the same brand name was used by the company as a platform-marketing initiative. The change of the meaning of the brand name occurred on January 7, 2010. The Centrino was replaced by the Ultrabook.
The old platform-marketing brand name covered a particular combination of mainboard chipset, mobile CPU and wireless network interface in the design of a laptop. Intel claimed that systems equipped with these technologies delivered better performance, longer battery life and broader wireless network interoperability than non-Centrino systems.
The new product line name for Intel wireless products is Intel Centrino Wireless.
Intel used "Carmel" as the codename for the first-generation Centrino platform, introduced in March 2003.
Industry-watchers initially criticized the Carmel platform for its lack of support for IEEE 802.11g, because many independent Wi-Fi chip-makers like Broadcom and Atheros had already started shipping 802.11g products. Intel responded that the IEEE had not finalized the 802.11g standard at the time of Carmel's announcement.
In early 2004, after the finalization of the 802.11g standard, Intel permitted an Intel PRO/Wireless 2200BG to substitute for the 2100. At the same time, they permitted the new Dothan Pentium M to substitute for the Banias Pentium M. Initially, Intel permitted only the 855GM chipset, which did not support external graphics. Later, Intel allowed the 855GME and 855PM chips, which did support external graphics, in Centrino laptops.
Despite criticisms, the Carmel platform won quick acceptance among OEMs and consumers. Carmel could attain or exceed the performance of older Pentium 4-M platforms, while allowing for laptops to operate for 4 to 5 hours on a 48 W-h battery. Carmel also allowed laptop manufacturers to create thinner and lighter laptops because its components did not dissipate much heat, and thus did not require large cooling systems.
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
Yonah is the code name of Intel's first generation 65 nm process CPU cores, based on cores of the earlier Banias (130 nm) / Dothan (90 nm) Pentium M microarchitecture. Yonah CPU cores were used within Intel's Core Solo and Core Duo mobile microprocessor products. SIMD performance on Yonah improved through the addition of SSE3 instructions and improvements to SSE and SSE2 implementations; integer performance decreased slightly due to higher latency cache. Additionally, Yonah included support for the NX bit.
Intel Atom is a line of IA-32 and x86-64 instruction set ultra-low-voltage processors by Intel Corporation designed to reduce electric consumption and power dissipation in comparison with ordinary processors of the Intel Core series. Atom is mainly used in netbooks, nettops, embedded applications ranging from health care to advanced robotics, mobile Internet devices (MIDs) and phones. The line was originally designed in 45 nm complementary metal–oxide–semiconductor (CMOS) technology and subsequent models, codenamed Cedar, used a 32 nm process.
The Pentium M is a family of mobile 32-bit single-core x86 microprocessors (with the modified Intel P6 microarchitecture) introduced in March 2003 and forming a part of the Intel Carmel notebook platform under the then new Centrino brand. The Pentium M processors had a maximum thermal design power (TDP) of 5–27 W depending on the model, and were intended for use in laptops (thus the "M" suffix standing for mobile).
FPGA routing is one of the most time-consuming steps of FPGA compilation, often preventing fast edit-compile-test cycles in prototyping and development. There have been attempts to accelerate FPGA routing using algorithmic improvements, multi-core or multi ...
2019
As hardware evolves, so do the needs of applications. To increase the performance of an application,
there exist two well-known approaches. These are scaling up an application, using a larger multi-core
platform, or scaling out, by distributing work to mul ...
EPFL2018
, , ,
The rapid expansion of online-based services requires novel energy and performance efficient architectures to meet power and latency constraints. Fast architectural exploration has become a key enabler in the proposal of architectural innovation. In this p ...