Lead–acid battery

Summary

The lead–acid battery is a type of rechargeable battery first invented in 1859 by French physicist Gaston Planté. It is the first type of rechargeable battery ever created. Compared to modern rechargeable batteries, lead–acid batteries have relatively low energy density. Despite this, their ability to supply high surge currents means that the cells have a relatively large power-to-weight ratio. These features, along with their low cost, make them attractive for use in motor vehicles to provide the high current required by starter motors. Lead-acid batteries suffer from relatively short cycle lifespan (usually less than 500 deep cycles) and overall lifespan (due to the "double sulfation" in the discharged state), as well as slow or long charging time. As they are inexpensive compared to newer technologies, lead–acid batteries are widely used even when surge current is not important and other designs could provide higher energy densities. In 1999, lead–acid battery sales accounted for

Official source

https://en.wikipedia.org/wiki/Lead%E2%80%93acid_battery

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (10)

Related publications

Related people

Related units

No results

Related concepts (70)

Related concepts

Related courses (18)

Related courses

Related lectures (31)

Related lectures

Though models describing the operating mechanism of organic electrochemical transistors (OECTs) have been developed, these models are unable to accurately reproduce OECT electrical characteristics. Here, the authors report a thermodynamic-based framework that accurately models OECT operation. Despite their increasing usefulness in a wide variety of applications, organic electrochemical transistors still lack a comprehensive and unifying physical framework able to describe the current-voltage characteristics and the polymer/electrolyte interactions simultaneously. Building upon thermodynamic axioms, we present a quantitative analysis of the operation of organic electrochemical transistors. We reveal that the entropy of mixing is the main driving force behind the redox mechanism that rules the transfer properties of such devices in electrolytic environments. In the light of these findings, we show that traditional models used for organic electrochemical transistors, based on the theory of field-effect transistors, fall short as they treat the active material as a simple capacitor while ignoring the material properties and energetic interactions. Finally, by analyzing a large spectrum of solvents and device regimes, we quantify the entropic and enthalpic contributions and put forward an approach for targeted material design and device applications.

NATURE PORTFOLIO2022

A review of sustainable energy access and technologies for healthcare facilities in the Global South

Andrea Franco, Silvia Hostettler, Dikolela Kalubi, Marjan Shaker

Access to reliable, affordable and sustainable energy is essential for improving living standards, development and economic growth. From a healthcare perspective, energy is a critical parameter for delivering and improving healthcare services and life-saving interventions in the Global South. This review provides an estimation of the energy needs of different healthcare facilities as a function of patient capacity and services provided. It also presents the strengths and limitations of several energy sources that can be used to meet these needs. The review focuses on energy provision in off-grid scenarios and for satisfying peak demands of grid-connected hospitals. The initial key observations are that fossil-fuel generators are the main energy source because of their low investment costs. However, this technology can no longer compete with the energy produced from renewable sources in terms of levelized cost of electricity (LCOE). Photovoltaics (PV) has an LCOE of 0.09 USD/kWh, versus an average 0.25 USD/kWh for diesel generators. Moreover, PV is a modular technology that can efficiently meet energy demands in an environment-friendly way. Wind turbines share many strengths of PV and yet both technologies suffer from intermittent energy sources. They must therefore be coupled with a storage system that provides continuous and stable electricity. Today, energy is mainly stored electrochemically, in the form of lead-acid batteries. However, this review shows that nickel-metal hydride (NiMH) should be used when possible for their higher energy density (200 Wh/l versus 80 Wh/l), non-toxicity, safety and simple maintenance. Alternatively, lithium-based batteries should be used when the energy density and number of cycles is a priority. Other energy production means (e.g., hydropower) and storage technologies (e.g., flywheels) are reviewed as well. In conclusion, the optimal energy solution for medium-to-large healthcare facilities, especially for those in off-grid settings, is a hybrid system wherein the strengths of a renewable energy source coupled with efficient batteries is combined with a diesel generator to minimize the LCOE.

Elsevier Science Bv2017

Synergic Effect of Dendrite-Free and Zinc Gating in Lignin-Containing Cellulose Nanofibers-MXene Layer Enabling Long-Cycle-Life Zinc Metal Batteries

Zhen Li, Yao Wang, Xu Zhang, Kangning Zhao

Uncontrollable zinc dendrite growth and parasitic reactions have greatly hindered the development of high energy and long life rechargeable aqueous zinc-ion batteries. Herein, the synergic effect of a bifunctional lignin-containing cellulose nanofiber (LCNF)-MXene (LM) layer to stabilize the interface of zinc anode is reported. On one hand, the LCNF provides enough strength (43.7 MPa) at relative low porosity (52.2%) to enable the diffusion limited dendrite suppression, while, on the other hand, the MXene serves as a zinc gating layer, facilitating the zinc ion mobility, restricting the active water/anions from degradation in the electrode/electrolyte interface, and epitaxially guiding zinc deposition along (002) plane. Benefiting from the synergic effect of diffusion limited dendrite suppression and zinc gate, the LM layer enabled a high coulombic efficiency (CE) of 98.9% with a low overpotential of 43.1 mV at 1 mA cm(-2) in Zn//Cu asymmetric cells. More importantly, Zn//MnO2 full cells with the LM layer achieve a high-capacity retention of 90.0% for over 1000 cycles at 1 A g(-1), much higher than the full cell without the protective layer (73.9% over 500 cycles). The work provides a new insight in designing a dendrite-free zinc anode for long-cycle-life batteries.

WILEY2022

A review of sustainable energy access and technologies for healthcare facilities in the Global South

Andrea Franco, Silvia Hostettler, Dikolela Kalubi, Marjan Shaker

Elsevier Science Bv2017