Aside from intentional interference, multipath is the most significant error source for Global Navigation Satellite Systems (GNSS) receivers in many operational scenarios. In this thesis, we study the multipath estimation from two different perspectives: t ...
In this work, we address the problem of tracking an acoustic source based on measured time differences of arrival (TDOA). The classical solution to this problem consists in using a detector, which estimates the TDOA for each microphone pair, and then apply ...
Controlling of the orientation of mesochannels in mesostructured thin films is important for the development of novel molecular devices and, in particular, generating vertically aligned mesochannels with respect to the substrate plane is extremely challeng ...
TDOA- (time difference of arrival-) based algorithms are common methods for speech source localization. The generalized cross correlation (GCC) method is the most important approach for estimating TDOA between microphone pairs. The performance of this meth ...
2011
Graph Chatbot
Chat with Graph Search
Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
In this paper, we focus on the localization of a passive source from time difference of arrival (TDOA) measurements. TDOA values are computed with respect to pairs of fixed sensors that are required to be accurately time-synchronized. This constitutes a we ...
Measuring the Time delay of Arrival (TDOA) between a set of sensors is the basic setup for many applications, such as localization or signal beamforming. This paper presents the set of TDOA matrices, which are built from noise-free TDOA measurements, not r ...
Institute of Electrical and Electronics Engineers2015
In this work, we address the problem of tracking an acoustic source based on measured time difference of arrivals (TDOAs). The classical solution to this problem consists in using a detector, which estimates the TDOA for each microphone pair, and then appl ...
Gas-insulated switchgear (GIS) are some of the most reliable and most expensive equipment that are nowadays used in power systems. Condition monitoring of the power system equipment can help operators detect defects like partial discharges (PDs) early, pre ...
A single GNSS antenna moving along a known trajectory can be used to synthesize a virtual array in order to apply spatial diversity techniques, e.g. beamforming. With these techniques, referred as synthetic aperture (SA) techniques, the receiver can mitiga ...
This study highlights the benefits of precise aerial position and attitude control in the context of mapping with Micro Aerial Vehicles (MAVs). Accurate mapping with MAVs is gaining importance in applications such as corridor mapping, road and pipeline ins ...