Membrane | EPFL Graph Search

Are you an EPFL student looking for a semester project?

Work with us on data science and visualisation projects, and deploy your project as an app on top of GraphSearch.

A membrane is a selective barrier; it allows some things to pass through but stops others. Such things may be molecules, ions, or other small particles. Membranes can be generally classified into synthetic membranes and biological membranes. Biological membranes include cell membranes (outer coverings of cells or organelles that allow passage of certain constituents); nuclear membranes, which cover a cell nucleus; and tissue membranes, such as mucosae and serosae. Synthetic membranes are made by humans for use in laboratories and industry (such as chemical plants). This concept of a membrane has been known since the eighteenth century but was used little outside of the laboratory until the end of World War II. Drinking water supplies in Europe had been compromised by the war and membrane filters were used to test for water safety. However, due to the lack of reliability, slow operation, reduced selectivity and elevated costs, membranes were not widely exploited. The first use of membranes on a large scale was with microfiltration and ultrafiltration technologies. Since the 1980s, these separation processes, along with electrodialysis, are employed in large plants and, today, several experienced companies serve the market. The degree of selectivity of a membrane depends on the membrane pore size. Depending on the pore size, they can be classified as microfiltration (MF), ultrafiltration (UF), nanofiltration (NF) and reverse osmosis (RO) membranes. Membranes can also be of various thickness, with homogeneous or heterogeneous structure. Membranes can be neutral or charged, and particle transport can be active or passive. The latter can be facilitated by pressure, concentration, chemical or electrical gradients of the membrane process. Microfiltration Microfiltration removes particles higher than 0.08-2 μm and operates within a range of 7-100 kPa. Microfiltration is used to remove residual suspended solids (SS), to remove bacteria in order to condition the water for effective disinfection and as a pre-treatment step for reverse osmosis.

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (58)

Related people (32)

Related units (3)

Related concepts (8)

Related courses (67)

MSE-204: Thermodynamics for materials science

This course establishes the basic concepts of thermodynamics and defines the main state functions. The concepts are then applied to the study of phase diagrams of various systems.

BIO-640: Practical - Van der Goot Lab

Membrane organization. Investigate the compartmentalisation of biological membranes: what are the determinants of the localization of transmembrane proteins in the 2 dimensional space of the membranes

ENV-202: Microbiology for engineers

Le cours "Microbiologie pour l'ingénieur" couvre les processus microbiens principaux qui ont lieu dans l'environnement et dans des systèmes de traitement. Il présente les cycles des éléments qui sont

Related lectures (484)

Related MOOCs (11)

Model-based scale-up of a continuously operated consolidated bioprocess based on a microbial consortium for the production of ethanol

David Béat Dempfle

This work demonstrated that consolidated bioprocessing is a promising concept for conversion of lignocellulose to ethanol at industrial scale. CBP offers great cost saving potential, is feasible to be

EPFL2022

Pretreatment options for micropollutant abatement before aquifer recharge in drinking water production: Assessment of UV/H2O2 and dense membranes

Robin Wünsch

Micropollutants (MP) such as residues of pharmaceuticals, industrial chemicals or pesticides can be detected in almost all water resources. Various processes can be used to abate them in drinking wate

EPFL2022

Two-dimensional atomically bridged nanoporous silicate-based membranes for gas separation

Mostapha Dakhchoune

The synthesis of molecular-sieving two-dimensional zeolitic membranes by the assembly of crystalline building blocks without resorting to the secondary growth process is highly desirable. The precise

EPFL2022

The cell membrane (also known as the plasma membrane or cytoplasmic membrane, and historically referred to as the plasmalemma) is a biological membrane that separates and protects the interior of a cell from the outside environment (the extracellular space). The cell membrane consists of a lipid bilayer, made up of two layers of phospholipids with cholesterols (a lipid component) interspersed between them, maintaining appropriate membrane fluidity at various temperatures.

Microfiltration is a type of physical filtration process where a contaminated fluid is passed through a special pore-sized membrane filter to separate microorganisms and suspended particles from process liquid. It is commonly used in conjunction with various other separation processes such as ultrafiltration and reverse osmosis to provide a product stream which is free of undesired contaminants. Microfiltration usually serves as a pre-treatment for other separation processes such as ultrafiltration, and a post-treatment for granular media filtration.

An artificial membrane, or synthetic membrane, is a synthetically created membrane which is usually intended for separation purposes in laboratory or in industry. Synthetic membranes have been successfully used for small and large-scale industrial processes since the middle of twentieth century. A wide variety of synthetic membranes is known. They can be produced from organic materials such as polymers and liquids, as well as inorganic materials. The most of commercially utilized synthetic membranes in separation industry are made of polymeric structures.

Learn about how the quality of water is a direct result of complex bio-geo-chemical interactions, and about how to use these processes to mitigate water quality issues.

Learn how to digitally reconstruct a single neuron to better study the biological mechanisms of brain function, behaviour and disease.

Covers the basics of structural elements like beams, cables, arches, and trusses.

Covers stability in structures, equilibrium, resistance, and stiffness of different elements and forces.

Explores lightweight membranes for covering large surfaces with transparency and light effects.