Natural uranium (NU or Unat) refers to uranium with the same isotopic ratio as found in nature. It contains 0.711% uranium-235, 99.284% uranium-238, and a trace of uranium-234 by weight (0.0055%). Approximately 2.2% of its radioactivity comes from uranium-235, 48.6% from uranium-238, and 49.2% from uranium-234.
Natural uranium can be used to fuel both low- and high-power nuclear reactors. Historically, graphite-moderated reactors and heavy water-moderated reactors have been fueled with natural uranium in the pure metal (U) or uranium dioxide (UO2) ceramic forms. However, experimental fuelings with uranium trioxide (UO3) and triuranium octaoxide (U3O8) have shown promise.
The 0.72% uranium-235 is not sufficient to produce a self-sustaining critical chain reaction in light water reactors or nuclear weapons; these applications must use enriched uranium. Nuclear weapons take a concentration of 90% uranium-235, and light water reactors require a concentration of roughly 3% uranium-235. Unenriched natural uranium is appropriate fuel for a heavy-water reactor, like a CANDU reactor.
On rare occasions, earlier in geologic history when uranium-235 was more abundant, uranium ore was found to have naturally engaged in fission, forming natural nuclear fission reactors. Uranium-235 decays at a faster rate (half-life of 700 million years) compared to uranium-238, which decays extremely slowly (half-life of 4.5 billion years). Therefore, a billion years ago, there was more than double the uranium-235 compared to now.
During the Manhattan Project, the name Tuballoy was used to refer to natural uranium in the refined condition; this term is still in occasional use. Uranium was also codenamed "X-Metal" during World War II. Similarly, enriched uranium was referred to as Oralloy (Oak Ridge alloy), and depleted uranium was referred to as Depletalloy (depleted alloy).
This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.
In this course, one acquires an understanding of the basic neutronics interactions occurring in a nuclear fission reactor as well as the conditions for establishing and controlling a nuclear chain rea
This course is intended to understand the engineering design of nuclear power plants using the basic principles of reactor physics, fluid flow and heat transfer. This course includes the following: Re
The neutron detection temperature, also called the neutron energy, indicates a free neutron's kinetic energy, usually given in electron volts. The term temperature is used, since hot, thermal and cold neutrons are moderated in a medium with a certain temperature. The neutron energy distribution is then adapted to the Maxwell distribution known for thermal motion. Qualitatively, the higher the temperature, the higher the kinetic energy of the free neutrons. The momentum and wavelength of the neutron are related through the de Broglie relation.
Gaseous diffusion is a technology that was used to produce enriched uranium by forcing gaseous uranium hexafluoride (UF6) through microporous membranes. This produces a slight separation (enrichment factor 1.0043) between the molecules containing uranium-235 (235U) and uranium-238 (238U). By use of a large cascade of many stages, high separations can be achieved. It was the first process to be developed that was capable of producing enriched uranium in industrially useful quantities, but is nowadays considered obsolete, having been superseded by the more-efficient gas centrifuge process.
Uranium dioxide or uranium(IV) oxide (), also known as urania or uranous oxide, is an oxide of uranium, and is a black, radioactive, crystalline powder that naturally occurs in the mineral uraninite. It is used in nuclear fuel rods in nuclear reactors. A mixture of uranium and plutonium dioxides is used as MOX fuel. Prior to 1960, it was used as yellow and black color in ceramic glazes and glass. Uranium dioxide is produced by reducing uranium trioxide with hydrogen.
Introduces Generation IV nuclear reactors, focusing on fast-spectrum reactors and their sustainability, breeding of fissile fuel, properties of coolants, historical development, advantages, disadvantages, and key challenges.
SEM micrographs of the fracture surface for UO2 ceramic materials have been analysed. In this paper, we introduce some algorithms and develop a computer application based on the time-series method. Utilizing the embedding technique of phase space, the attr ...
MDPI2022
Reactor physics characteristics have been assessed for a range of mixtures of plutonium and different burnable poisons (BPs) from the viewpoint of providing a possible LWR fuel without uranium. A much higher potential for plutonium-inventory reduction than ...
The management of radioactive wastes from the nuclear fuel cycle has become an important issue in the development of future, more sustainable nuclear energy systems. Partitioning and transmutation (P&T) of actinides and some long-lived fission products cou ...