Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
Cast-in-place thin layers of Ultra-High Performance Fiber Reinforced Cementitious Composites (UHPFRC) on the specific zones of existing reinforced concrete (RC) bridge decks has been demonstrated to be a technically efficient and economic rehabilitation an ...
This paper addresses the uniaxial tensile response of Strain Hardening Ultra High-Performance Fiber Reinforced Concretes (SH-UHPFRC) subjected to very low strain rates and low temperatures. The influence of four different strain rates; 1 × 10−5, 1 × 10−7, ...
The biaxial flexural response of strain-hardening UHPFRC circular slab element is investigated experimentally and analytically using the ring-on-ring test. The Digital Image Correlation (DIC) technology is applied to capture the 3D full-field of strain and ...
The ability to 3D print soft materials with integrated strain sensors enables significant flexibility for the design and fabrication of soft robots. Hydrogels provide an interesting alternative to traditional soft robot materials, allowing for more varied ...
Institute of Electrical and Electronics Engineers Inc.2021
Wear is well known for causing material loss in a sliding interface. Available macroscopic approaches are bound to empirical fitting parameters. We propose a study of the physical processes that lead to wear at the scale of the surface roughness, where adhe ...
The tensile response of strain hardening UHPFRC under full restraint, subjected to curing temperatures of 20 °C, 10 °C, 5 °C, was investigated for two types of mixes with silica fume; Mix I with pure type I cement and Mix II with 50% replacement of cement ...
Spalling in tantalum has been observed in an experiment aiming at testing an antiproton production target prototype at CERN’s HiRadMat Facility. The experiment consisted in impacting 47 intense and high-energy proton beams onto a target equipped with ten c ...
Difficulties with joining oxide dispersion-strengthened (ODS) steels using classical welding processes have led to the development of alternative joining techniques such as spark plasma sintering (SPS). SPS, which is classically employed for performing sin ...
Fracture mechanics is an important tool to assess the slope stability, since this approach offers a methodology to study the fracture stress field in the neighborhood of the joint tips and accurately predict propagation of the joints. While the fracture to ...
This study aims to experiment with the mechanical properties of polypropylene (PP)/thermoplastic elastomer/nano-silica/compatibilizer nanocomposite using the melt mixing method. The addition of polyolefin elastomers has proved to be an approachable solutio ...