Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
This work aimed to set new guidelines for the quantification of Cr accumulation in solid oxide fuel cell cathodes after operation, and enabled to pinpoint a diffusion-controlled tolerance to Cr-poisoning for increased cathode thickness; the additional cath ...
The high charge PHIN photo injector is studied at CERN as an electron source for the CLIC Test Facility (CTF3) drive beam as an alternative to the present thermionic gun. The objective of PHIN is to demonstrate the feasibility of a laser-based electron sou ...
Electron beams in modern linear accelerators are now becoming limited in brightness by the intrinsic emittance of the photocathode electron source. Therefore it becomes important for large scale facilities such as free electron lasers to reduce this fundam ...
We review herein several important aspects of surface chemistry in Li-ion batteries, and discuss the use of ionic liquids (ILs) for rechargeable Li batteries. We explored the suitability of ILs for 5 V cathodes and Li-graphite anodes. Some advantages of th ...
We present the first evidence of charge injection improvement in an organic electroluminescent device provided by a single ionic molecular layer. A hole-dominated, hybrid organic-inorganic light-emitting device is used as a probe to verify the effectivenes ...
LiMnPO4 nanoparticles synthesized by the polyol method were examined as a cathode material for advanced Li-ion batteries. The structure, surface morphology, and performance were characterized by X-ray diffraction, high resolution scanning electron microsco ...
Sulfur poisoning in a strontium doped lanthanum cobaltite (LSC) cathode current collection layer was revealed in a solid oxide fuel cell (SOFC) tested in repeat-element and stack configuration. Sources of sulfur contamination, other than trace SOx in air, ...
A novel polyol synthesis was adopted to synthesize nano-structured LiMnPO4. This route yields well-crystallized nanoparticles with platelet morphology that are only similar to 30 nm thick oriented in the b direction. The obtained material presented a good ...
We have simulated short channel carbon nanotube field-effect transistors with asymmetric source and drain contacts using a Coupled mode space approach within the non-equilibrium Green's function framework. The simulated results show that the asymmetric con ...