Ask any question about EPFL courses, lectures, exercises, research, news, etc. or try the example questions below.
DISCLAIMER: The Graph Chatbot is not programmed to provide explicit or categorical answers to your questions. Rather, it transforms your questions into API requests that are distributed across the various IT services officially administered by EPFL. Its purpose is solely to collect and recommend relevant references to content that you can explore to help you answer your questions.
3D stacked architectures are getting increasingly attractive as they improve yield, reduce interconnect power and latency, and enable integrating layers manufactured with different technologies on the same chip. However, 3D integration results in higher te ...
A conceptually novel macrolactonization technology is described. A strategically positioned 5-aminooxazole served as an internal traceless activator of the neighboring C-terminal carboxylic acid allowing the occurrence of macrolactonization under mild acid ...
The depolarization temperature T-d of piezoelectric materials is an important figure of merit for their application at elevated temperatures. Until now, there are several methods proposed in the literature to determine the depolarization temperature of pie ...
The reactions of coronene dehydrogenation and fusion upon heat treatment in the temperature range of 500-700 degrees C were studied using XRD, TEM, Raman, IR, and NEXAFS spectroscopy. The formation of a coronene dimer (dicoronylene) was observed at tempera ...
In this work, we investigate the piezoresistive response of epoxy-graphite composites. A resistive thick-film Wheatstone bridge is deposited by screen-printing onto an alumina beam, a weight is then applied on the tip of the beam and the resulting electric ...
Elsevier Science, Reg Sales Off, Customer Support Dept, 655 Ave Of The Americas, New York, Ny 10010 Usa2011
Several Hall sensor configurations have been integrated in CMOS technology and analyzed in terms of offset at room temperature and offset drift. We looked for the best geometry that would minimize the offset and its drift. The targeted specification was 30 ...
A 4H-SiC pressure sensor with piezoresistive transducers, for harsh environment applications, e.g., high temperature (~650°C) and/or in corrosive chemicals is presented. The sensing membrane, 1 mm in diameter and 50 µm in thickness, was formed by milling ( ...
Ieee Service Center, 445 Hoes Lane, Po Box 1331, Piscataway, Nj 08855-1331 Usa2011
In this work we report an experimental study on accumulation-mode (AM) gate-all-around (GAA) nMOSFETs based on silicon nanowires with uniaxial tensile strain. Their electrical characteristics are studied from room temperature up to ~400 K and carrier mobil ...
The electrical conductivities of complex hydrides Li2(BH 4)(NH2) and Li4(BH4)(NH 2)3 consisting of (BH4)- and (NH2)- anions are investigated focusing on their low melting temperatures (365 K for Li2(BH4)(NH2) and 490K for Li4(BH4)(NH2)3). The two hydrides ...
Two molecules containing two phenylphosphaalkene moieties linked by an anthracene (1) or by a naphthalene (2) ring have been synthesized and their crystal structures have been determined. While electrochemical measurements show that these two systems are e ...