Crosstalk

Summary

In electronics, crosstalk is any phenomenon by which a signal transmitted on one circuit or channel of a transmission system creates an undesired effect in another circuit or channel. Crosstalk is usually caused by undesired capacitive, inductive, or conductive coupling from one circuit or channel to another. Crosstalk is a significant issue in structured cabling, audio electronics, integrated circuit design, wireless communication and other communications systems. Mechanisms Every electrical signal is associated with a varying field, whether electrical, magnetic or traveling. Where these fields overlap, they interfere with each other's signals. This electromagnetic interference creates crosstalk. For example, if two wires next to each other carry different signals, the currents in them will create magnetic fields that will induce a smaller signal in the neighboring wire. In electrical circuits sharing a common signal return path, electrical impedance in the return path c

Official source

https://en.wikipedia.org/wiki/Crosstalk

About this result

This page is automatically generated and may contain information that is not correct, complete, up-to-date, or relevant to your search query. The same applies to every other page on this website. Please make sure to verify the information with EPFL's official sources.

Related publications (16)

Related publications

Related people

Related units

Related concepts (24)

Telecommunication, often used in its plural form, is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin i

Twisted pair cabling is a type of wiring used for communications in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility. Compare

Electromagnetic interference (EMI), also called radio-frequency interference (RFI) when in the radio frequency spectrum, is a disturbance generated by an external source that affects an electrical c

Related concepts

Related courses (8)

Related courses

Related lectures (16)

Related lectures

To investigate the cross talk between SnX3 with DevR and NarL

Jérémie Fivat

EPFL2007

Insomnia in the Access (or How to Curb Access Network Related Energy Consumption)

Marco Canini, Dejan Kostic, Alberto López

Access networks include modems, home gateways, and DSL Access Multiplexers (DSLAMs), and are responsible for 70-80% of total network-based energy consumption. In this paper, we take an in-depth look at the problem of greening access networks, identify root problems, and propose practical solutions for their user- and ISP-parts. On the user side, the combination of continuous light traffic and lack of alternative paths condemns gateways to being powered most of the time despite having Sleep-on-Idle (SoI) capabilities. To address this, we introduce Broadband Hitch-Hiking (BH2), that takes advantage of the overlap of wireless networks to aggregate user traffic in as few gateways as possible. In current urban settings BH2 can power off 65-90% of gateways. Powering off gateways permits the remaining ones to synchronize at higher speeds due to reduced crosstalk from having fewer active lines. Our tests reveal speedup up to 25%. On the ISP side, we propose introducing simple inexpensive switches at the distribution frame for batching active lines to a subset of cards letting the remaining ones sleep. Overall, our results show an 80% energy savings margin in access networks. The combination of BH2 and switching gets close to this margin, saving 66% on average.

2011

26.3 A pin- and power-efficient low-latency 8-to-12Gb/s/wire 8b8w-coded SerDes link for high-loss channels in 40nm technology

Harm Cronie, Klaas Lammert Hofstra, Kia Salimi, Mohammad Amin Shokrollahi, Anant Pratap Singh, Christoph Walter

The continuing demand for higher bandwidth in serial interconnects has pushed the symbol rate of differential lanes into the high-insertion-loss region of channels. Multi-level signaling such as differential PAM-4 [1] has been used to mitigate the loss of electrical channels by lowering the signal spectrum. Such an approach suffers from lower SNR tolerance as well as higher susceptibility to crosstalk and ISI as compared to differential signaling (DS). Coded differential approaches have been reported [2] to mitigate ISI. Our approach is a generalization of DS in which ternary values are transmitted on an 8-wire bus. The set of transmitted values belongs to a code consisting of 256 code-words called the 8b8w-code (8-bits-on-8-wires) [3]. The specific correlations in the code-words of the 8b8w-code eliminate transmit common-mode and simultaneous switching output (SSO) noise and allow for detection via self-referencing comparators (unlike PAM-4), which provides additional noise immunity. Compared to DS, the 8b8w-code offers twice the throughput at 50% of the line power. Compared to PAM-4, the code offers better SNR (3dB) at 38% of the line power with enhanced tolerance of ISI and lower crosstalk generation. The design and experimental verification of an 8b8w transceiver in 40nm CMOS is described. Transmission is achieved up to 12Gb/s per wire over 55cm of Rogers with up to 15dB loss.

2014