Concept
Liquid nitrogen
Related publications (84)
Quantitative Prediction Of Flow Patterns In Liquid-Liquid Flow In Micro-Capillaries
Lioubov Kiwi, Madhvanand Namadeo Kashid
Flow patterns in microstructured reactors (or microchannels) play an important role in dictating the mass transfer rates. In the present work, experiments were carried out to investigate the two phase (liquids) flow patterns in microchannels with different ...
Elsevier2011Study of the twinned dendrite tip shape I : Phase-field modeling
Michel Rappaz, Jean-Luc Desbiolles, Mario Alberto Salgado Ordorica
The growth kinetics advantage of twinned aluminum dendrites over regular ones is still an unsolved problem of solidification. Although it is linked to the tip geometry, the influence of a coherent (1 1 1) twin plane on a < 1 1 0 > twinned dendrite tip is u ...
Elsevier2011Thermal Modeling and Management of Liquid-Cooled 3D Stacked Architectures
David Atienza Alonso, Ayse Kivilcim Coskun
3D stacked architectures are getting increasingly attractive as they improve yield, reduce interconnect power and latency, and enable integrating layers manufactured with different technologies on the same chip. However, 3D integration results in higher te ...
Jürgen Becker, Marcelo Johann, Ricardo Reis2011Thermal Analysis and Active Cooling Management for 3D MPSoCs
David Atienza Alonso, Ayse Kivilcim Coskun
3D stacked architectures reduce communication delay in multiprocessor system-on-chips (MPSoCs) and allowing more functionality per unit area. However, vertical integration of layers exacerbates the reliability and thermal problems, and cooling is a limitin ...
IEEE Press2011Solid on liquid deposition
A process for the deposition of a solid layer onto a liquid is presented. The polymer poly-di-chloro-paraxylylene, also known as Parylene C, was grown on low vapour pressure liquids using the conventional low pressure chemical vapour deposition process. A ...
Elsevier2010Falling-Film Evaporation On Tube Bundle With Plain And Enhanced Tubes-Part I: Experimental Results
John Richard Thome, Mathieu Habert
The complexities of two-phase flow and falling-film evaporation on a tube bundle present important challenges in the design of heat exchangers and the understanding of the physical phenomena taking place. The development of structured surfaces to enhance n ...
2010A unique approach to reveal the nanocomposite nc-MN/SiN-layer architecture of thin films via electrical measurements
Rosendo Sanjines, Silviu Cosmin Sandu, Scott Harada
By addition of Si to a binary transition metal nitride MN (e.g. TiN, ZrN, NbN, CrN), the hardness, thermal stability and chemical inertness of films have been considerably improved. The formation of a ternary M–Si–N ternary phase is possible under specific ...
2010As-Cast Residual Stresses in an Aluminum Alloy AA6063 Billet: Neutron Diffraction Measurements and Finite Element Modeling
Jean-Marie Drezet, André Phillion
The presence of thermally induced residual stresses, created during the industrial direct chill (DC) casting process of aluminum alloys, can cause both significant safety concerns and the formation of defects during downstream processing. Although numerica ...
2010Quantitative criteria to define flow patterns in micro-capillaries
Lioubov Kiwi, Charline Berguerand, Anne-Laure Dessimoz, Pauline Raspail
Hydrodynamics of gas-liquid systems has been studied by high-speed camera. The flow patterns of CO2/water-based fluids were investigated in three glass microreactors having different geometries. Four main regimes were observed: bubbly, slug, slug-annular a ...
Elsevier2010Pultruded GFRP tubes with liquid cooling system under combined temperature and compressive loading
An active fire protection system, liquid-cooling, was applied to pultruded GFRP tubes subjected to combined thermal and mechanical loading in order to maintain material temperature below the critical glass transition temperature. The use of an appropriate ...
2009